APRS Track Direct

My position About ☰

reset

HS4POQ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4POQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1770108061	3 ug/m3	6 ug/m3	8 ug/m3	-42 dBm	0.08 V
1770107147	3 ug/m3	6 ug/m3	7 ug/m3	-43 dBm	0.14 V
1770106233	3 ug/m3	6 ug/m3	7 ug/m3	-43 dBm	0.08 V
1770105319	3 ug/m3	5 ug/m3	6 ug/m3	-32 dBm	0.1 V
1770104197	3 ug/m3	6 ug/m3	7 ug/m3	-42 dBm	0.08 V
1770103283	3 ug/m3	6 ug/m3	7 ug/m3	-42 dBm	0.08 V
1770102369	4 ug/m3	8 ug/m3	10 ug/m3	-40 dBm	0.1 V
1770101987	3 ug/m3	6 ug/m3	7 ug/m3	-39 dBm	0.1 V
1770101073	3 ug/m3	6 ug/m3	7 ug/m3	-41 dBm	0.1 V
1770100159	3 ug/m3	5 ug/m3	6 ug/m3	-39 dBm	0.08 V
1770099245	4 ug/m3	7 ug/m3	8 ug/m3	-41 dBm	0.14 V
1770098331	3 ug/m3	6 ug/m3	7 ug/m3	-41 dBm	0.08 V
1770097417	5 ug/m3	10 ug/m3	12 ug/m3	-41 dBm	0.08 V
1770096503	22 ug/m3	38 ug/m3	48 ug/m3	-42 dBm	0.08 V
1770095589	4 ug/m3	8 ug/m3	10 ug/m3	-39 dBm	0.1 V
1770094675	4 ug/m3	8 ug/m3	10 ug/m3	-41 dBm	0.08 V
1770093761	4 ug/m3	7 ug/m3	9 ug/m3	-42 dBm	0.08 V
1770092847	5 ug/m3	8 ug/m3	10 ug/m3	-37 dBm	0.1 V
1770091933	5 ug/m3	8 ug/m3	10 ug/m3	-40 dBm	0.1 V
1770091019	4 ug/m3	8 ug/m3	10 ug/m3	-39 dBm	0.1 V
1770090105	5 ug/m3	9 ug/m3	11 ug/m3	-39 dBm	0.12 V
1770089191	7 ug/m3	12 ug/m3	15 ug/m3	-42 dBm	0.08 V
1770088277	5 ug/m3	10 ug/m3	12 ug/m3	-40 dBm	0.08 V
1770087508	7 ug/m3	11 ug/m3	14 ug/m3	-41 dBm	0.1 V
1770086594	7 ug/m3	12 ug/m3	15 ug/m3	-39 dBm	0.08 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)