This is the latest recevied telemetry packets stored in our database for station/object DO2HN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779778191 | 19.3 C | 45.13 % | 1002.13 hPa | 0 | 0 |
| 1779775749 | 21 C | 44.84 % | 1031.5 hPa | 0 | 0 |
| 1779774845 | 19.5 C | 49.41 % | 1032.75 hPa | 0 | 0 |
| 1779774829 | 19.5 C | 49.41 % | 1031.88 hPa | 0 | 0 |
| 1779774813 | 19 C | 49.38 % | 1032.13 hPa | 0 | 0 |
| 1779774787 | 19 C | 49.38 % | 1033.25 hPa | 0 | 0 |
| 1779774759 | 18.6 C | 49.84 % | 1030.38 hPa | 0 | 0 |
| 1779774743 | 18.6 C | 49.84 % | 1031 hPa | 0 | 0 |
| 1779774721 | 18.6 C | 49.84 % | 1031.63 hPa | 0 | 0 |
| 1779774705 | 18.6 C | 49.84 % | 1031.88 hPa | 0 | 0 |
| 1779774662 | 18.1 C | 49.69 % | 1033.63 hPa | 0 | 0 |
| 1779774596 | 17.6 C | 48.74 % | 1031.25 hPa | 0 | 0 |
| 1779774580 | 17.6 C | 48.74 % | 1031.63 hPa | 0 | 0 |
| 1779774276 | 16 C | 49.73 % | 1000 hPa | 0 | 0 |
| 1779730174 | 31.9 C | 27.14 % | 1034 hPa | 0 | 0 |
| 1779729270 | 32.3 C | 26.67 % | 1032.25 hPa | 0 | 0 |
| 1779728366 | 32.7 C | 26.61 % | 1033.63 hPa | 0 | 0 |
| 1779727462 | 33.2 C | 25.55 % | 1032.75 hPa | 0 | 0 |
| 1779726558 | 33.6 C | 25.26 % | 1033.5 hPa | 0 | 0 |
| 1779725654 | 34.1 C | 25.31 % | 1033.63 hPa | 0 | 0 |
| 1779724750 | 34.7 C | 24.21 % | 1033.75 hPa | 0 | 0 |
| 1779723846 | 35.2 C | 24.53 % | 1031.25 hPa | 0 | 0 |
| 1779722942 | 35.9 C | 23.48 % | 1033.38 hPa | 0 | 0 |
| 1779722038 | 36.6 C | 22.35 % | 1033.63 hPa | 0 | 0 |
| 1779721134 | 37.5 C | 22.08 % | 1033 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)