This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758193976 | 54 Count | 173 Count | 53 Count | 4.42 VDC | 0 VDC |
| 1758192172 | 26 Count | 82 Count | 26 Count | 4.42 VDC | 0 VDC |
| 1758190372 | 370 Count | 1039 Count | 356 Count | 4.42 VDC | 0 VDC |
| 1758188571 | 346 Count | 973 Count | 333 Count | 4.42 VDC | 0 VDC |
| 1758186771 | 322 Count | 900 Count | 310 Count | 4.42 VDC | 0 VDC |
| 1758184970 | 295 Count | 829 Count | 284 Count | 4.39 VDC | 0 VDC |
| 1758183169 | 263 Count | 741 Count | 253 Count | 4.39 VDC | 0 VDC |
| 1758181367 | 225 Count | 653 Count | 216 Count | 4.39 VDC | 0 VDC |
| 1758179566 | 192 Count | 570 Count | 184 Count | 4.39 VDC | 0 VDC |
| 1758177774 | 141 Count | 443 Count | 138 Count | 4.39 VDC | 0 VDC |
| 1758175973 | 106 Count | 333 Count | 104 Count | 4.4 VDC | 0 VDC |
| 1758174172 | 60 Count | 225 Count | 59 Count | 4.39 VDC | 0 VDC |
| 1758172372 | 29 Count | 109 Count | 29 Count | 4.43 VDC | 0 VDC |
| 1758170571 | 407 Count | 1028 Count | 389 Count | 4.4 VDC | 0 VDC |
| 1758168770 | 364 Count | 895 Count | 347 Count | 4.4 VDC | 0 VDC |
| 1758166969 | 341 Count | 821 Count | 325 Count | 4.39 VDC | 0 VDC |
| 1758165169 | 320 Count | 770 Count | 305 Count | 4.41 VDC | 0 VDC |
| 1758163368 | 272 Count | 685 Count | 258 Count | 4.4 VDC | 0 VDC |
| 1758161567 | 247 Count | 631 Count | 234 Count | 4.4 VDC | 0 VDC |
| 1758159767 | 223 Count | 554 Count | 211 Count | 4.4 VDC | 0 VDC |
| 1758157966 | 194 Count | 462 Count | 183 Count | 4.42 VDC | 0 VDC |
| 1758134572 | 328 Count | 672 Count | 322 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)