APRS Track Direct

My position About ☰

reset

IZ8QHW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ8QHW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786732625	12.23 Volt	200 Pkt	20 Pkt	98 Pcnt
1786732624	12.23 Volt	200 Pkt	20 Pkt	98 Pcnt
1786732325	12.23 Volt	210 Pkt	20 Pkt	98 Pcnt
1786732025	12.23 Volt	220 Pkt	20 Pkt	98 Pcnt
1786732025	12.23 Volt	220 Pkt	20 Pkt	98 Pcnt
1786731724	12.23 Volt	220 Pkt	20 Pkt	98 Pcnt
1786731425	12.23 Volt	210 Pkt	20 Pkt	98 Pcnt
1786731424	12.23 Volt	210 Pkt	20 Pkt	98 Pcnt
1786731124	12.23 Volt	220 Pkt	10 Pkt	97 Pcnt
1786730825	12.23 Volt	220 Pkt	10 Pkt	97 Pcnt
1786730824	12.23 Volt	220 Pkt	10 Pkt	97 Pcnt
1786730524	12.23 Volt	220 Pkt	20 Pkt	97 Pcnt
1786730225	12.23 Volt	210 Pkt	10 Pkt	97 Pcnt
1786730224	12.23 Volt	210 Pkt	10 Pkt	97 Pcnt
1786729924	12.15 Volt	190 Pkt	10 Pkt	97 Pcnt
1786729625	12.15 Volt	170 Pkt	10 Pkt	96 Pcnt
1786729624	12.15 Volt	170 Pkt	10 Pkt	96 Pcnt
1786729325	12.15 Volt	160 Pkt	10 Pkt	94 Pcnt
1786729025	12.15 Volt	130 Pkt	10 Pkt	93 Pcnt
1786729025	12.15 Volt	130 Pkt	10 Pkt	93 Pcnt
1786728724	12.15 Volt	120 Pkt	10 Pkt	93 Pcnt
1786728425	12.15 Volt	100 Pkt	10 Pkt	92 Pcnt
1786728424	12.15 Volt	100 Pkt	10 Pkt	92 Pcnt
1786728125	12.15 Volt	80 Pkt	10 Pkt	89 Pcnt
1786727825	12.15 Volt	70 Pkt	10 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)