This is the latest recevied telemetry packets stored in our database for station/object NM5I-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779770859 | 404 | 622 | 304 | 0 | 0 |
| 1779770260 | 404 | 622 | 303 | 0 | 0 |
| 1779769964 | 404 | 622 | 304 | 0 | 0 |
| 1779769362 | 405 | 623 | 304 | 0 | 0 |
| 1779769063 | 404 | 623 | 305 | 0 | 0 |
| 1779768764 | 404 | 623 | 302 | 0 | 0 |
| 1779768465 | 404 | 623 | 303 | 0 | 0 |
| 1779768166 | 404 | 623 | 304 | 0 | 0 |
| 1779767867 | 404 | 623 | 306 | 0 | 0 |
| 1779767567 | 405 | 623 | 305 | 0 | 0 |
| 1779767269 | 405 | 624 | 303 | 0 | 0 |
| 1779758291 | 407 | 629 | 297 | 0 | 0 |
| 1779757692 | 407 | 630 | 296 | 0 | 0 |
| 1779753802 | 408 | 632 | 296 | 0 | 0 |
| 1779746003 | 459 | 628 | 287 | 0 | 0 |
| 1779745970 | 457 | 627 | 287 | 0 | 0 |
| 1779745938 | 456 | 627 | 291 | 0 | 0 |
| 1779745923 | 456 | 627 | 294 | 0 | 0 |
| 1779745885 | 457 | 627 | 294 | 0 | 0 |
| 1779745803 | 456 | 627 | 296 | 0 | 0 |
| 1779745656 | 456 | 626 | 297 | 0 | 0 |
| 1779745536 | 462 | 626 | 298 | 0 | 0 |
| 1779744689 | 412 | 625 | 304 | 0 | 0 |
| 1779744089 | 412 | 625 | 303 | 0 | 0 |
| 1779743789 | 411 | 625 | 300 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)