APRS Track Direct

My position About ☰

reset

KD9QDL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KD9QDL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1790626626	0.13 Rx Erlang	0.05 Tx Erlang	97 count/10m	67 count/10m	33 count/10m
1790625426	0.09 Rx Erlang	0.03 Tx Erlang	68 count/10m	40 count/10m	23 count/10m
1790624226	0.09 Rx Erlang	0.04 Tx Erlang	65 count/10m	39 count/10m	26 count/10m
1790623026	0.09 Rx Erlang	0.03 Tx Erlang	69 count/10m	37 count/10m	26 count/10m
1790621826	0.11 Rx Erlang	0.04 Tx Erlang	75 count/10m	45 count/10m	24 count/10m
1790620626	0.12 Rx Erlang	0.04 Tx Erlang	71 count/10m	45 count/10m	25 count/10m
1790619426	0.08 Rx Erlang	0.03 Tx Erlang	60 count/10m	34 count/10m	21 count/10m
1790618226	0.15 Rx Erlang	0.07 Tx Erlang	87 count/10m	61 count/10m	37 count/10m
1790617026	0.14 Rx Erlang	0.06 Tx Erlang	98 count/10m	70 count/10m	41 count/10m
1790615826	0.18 Rx Erlang	0.08 Tx Erlang	124 count/10m	97 count/10m	54 count/10m
1790614626	0.17 Rx Erlang	0.08 Tx Erlang	132 count/10m	93 count/10m	57 count/10m
1790613426	0.18 Rx Erlang	0.08 Tx Erlang	138 count/10m	82 count/10m	52 count/10m
1790612226	0.19 Rx Erlang	0.06 Tx Erlang	147 count/10m	82 count/10m	50 count/10m
1790611026	0.18 Rx Erlang	0.07 Tx Erlang	140 count/10m	80 count/10m	48 count/10m
1790609826	0.23 Rx Erlang	0.08 Tx Erlang	157 count/10m	73 count/10m	52 count/10m
1790608626	0.18 Rx Erlang	0.07 Tx Erlang	138 count/10m	76 count/10m	50 count/10m
1790607426	0.22 Rx Erlang	0.07 Tx Erlang	177 count/10m	85 count/10m	57 count/10m
1790606226	0.22 Rx Erlang	0.07 Tx Erlang	177 count/10m	75 count/10m	50 count/10m
1790605026	0.22 Rx Erlang	0.07 Tx Erlang	186 count/10m	70 count/10m	55 count/10m
1790603826	0.22 Rx Erlang	0.08 Tx Erlang	177 count/10m	80 count/10m	56 count/10m
1790602626	0.25 Rx Erlang	0.07 Tx Erlang	218 count/10m	77 count/10m	56 count/10m
1790601426	0.23 Rx Erlang	0.07 Tx Erlang	206 count/10m	73 count/10m	52 count/10m
1790600226	0.21 Rx Erlang	0.06 Tx Erlang	191 count/10m	52 count/10m	56 count/10m
1790599026	0.21 Rx Erlang	0.06 Tx Erlang	191 count/10m	56 count/10m	53 count/10m
1790597826	0.25 Rx Erlang	0.06 Tx Erlang	209 count/10m	71 count/10m	53 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)