APRS Track Direct

My position About ☰

reset

IR2T Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2T. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1836274767	23 Pkt	140 Pkt	12 Pkt	60 Pkt	100 Pcnt
1836274467	18 Pkt	140 Pkt	7 Pkt	60 Pkt	98 Pcnt
1836274317	25 Pkt	140 Pkt	11 Pkt	60 Pkt	99 Pcnt
1836274167	30 Pkt	140 Pkt	12 Pkt	60 Pkt	98 Pcnt
1836273866	19 Pkt	140 Pkt	9 Pkt	60 Pkt	97 Pcnt
1762361320	29 Pkt	210 Pkt	13 Pkt	100 Pkt	87 Pcnt
1762361020	36 Pkt	200 Pkt	15 Pkt	90 Pkt	88 Pcnt
1762360720	30 Pkt	190 Pkt	15 Pkt	90 Pkt	89 Pcnt
1762360420	13 Pkt	180 Pkt	9 Pkt	90 Pkt	89 Pcnt
1762360119	24 Pkt	180 Pkt	12 Pkt	90 Pkt	90 Pcnt
1762359819	61 Pkt	180 Pkt	27 Pkt	90 Pkt	88 Pcnt
1762359519	82 Pkt	180 Pkt	38 Pkt	90 Pkt	88 Pcnt
1762359218	55 Pkt	140 Pkt	28 Pkt	70 Pkt	90 Pcnt
1762358918	23 Pkt	110 Pkt	14 Pkt	60 Pkt	94 Pcnt
1762358618	10 Pkt	110 Pkt	5 Pkt	60 Pkt	94 Pcnt
1762358318	23 Pkt	110 Pkt	10 Pkt	50 Pkt	94 Pcnt
1762358018	26 Pkt	110 Pkt	14 Pkt	60 Pkt	94 Pcnt
1762357717	14 Pkt	110 Pkt	9 Pkt	60 Pkt	92 Pcnt
1762357417	21 Pkt	110 Pkt	10 Pkt	60 Pkt	92 Pcnt
1762357116	21 Pkt	100 Pkt	11 Pkt	60 Pkt	91 Pcnt
1762356816	10 Pkt	110 Pkt	8 Pkt	60 Pkt	91 Pcnt
1762356516	21 Pkt	100 Pkt	11 Pkt	60 Pkt	91 Pcnt
1762356216	20 Pkt	110 Pkt	10 Pkt	60 Pkt	93 Pcnt
1762355915	9 Pkt	110 Pkt	7 Pkt	60 Pkt	93 Pcnt
1762355615	23 Pkt	110 Pkt	13 Pkt	60 Pkt	94 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)