APRS Track Direct

My position About ☰

reset

HP1GDP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1GDP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1836274536	12.45 Volt	220 Pkt	90 Pkt	93 Pcnt	88 Pcnt
1836274386	12.45 Volt	210 Pkt	90 Pkt	93 Pcnt	88 Pcnt
1836273936	12.45 Volt	230 Pkt	90 Pkt	95 Pcnt	88 Pcnt
1782529451	12.15 Volt	90 Pkt	70 Pkt	61 Pcnt	76 Pcnt
1782528852	12.15 Volt	100 Pkt	70 Pkt	60 Pcnt	76 Pcnt
1782528252	12.15 Volt	100 Pkt	70 Pkt	62 Pcnt	76 Pcnt
1782527652	12.15 Volt	110 Pkt	70 Pkt	59 Pcnt	76 Pcnt
1782527052	12.15 Volt	110 Pkt	70 Pkt	61 Pcnt	76 Pcnt
1782526452	12.15 Volt	110 Pkt	70 Pkt	60 Pcnt	76 Pcnt
1782525852	12.15 Volt	100 Pkt	70 Pkt	61 Pcnt	76 Pcnt
1782525252	12.15 Volt	110 Pkt	70 Pkt	62 Pcnt	76 Pcnt
1782524652	12.15 Volt	100 Pkt	70 Pkt	64 Pcnt	76 Pcnt
1782524052	12.15 Volt	90 Pkt	60 Pkt	63 Pcnt	76 Pcnt
1782523452	12.15 Volt	80 Pkt	60 Pkt	61 Pcnt	76 Pcnt
1782522852	12.15 Volt	80 Pkt	60 Pkt	54 Pcnt	76 Pcnt
1782522252	12.15 Volt	80 Pkt	60 Pkt	51 Pcnt	76 Pcnt
1782521652	12.15 Volt	80 Pkt	60 Pkt	47 Pcnt	76 Pcnt
1782521052	12.15 Volt	80 Pkt	60 Pkt	46 Pcnt	76 Pcnt
1782520452	12.15 Volt	90 Pkt	70 Pkt	48 Pcnt	76 Pcnt
1782519852	12.15 Volt	80 Pkt	60 Pkt	48 Pcnt	76 Pcnt
1782519252	12.15 Volt	90 Pkt	70 Pkt	51 Pcnt	76 Pcnt
1782518652	12.15 Volt	100 Pkt	80 Pkt	54 Pcnt	76 Pcnt
1782518052	12.15 Volt	110 Pkt	80 Pkt	56 Pcnt	76 Pcnt
1782517452	12.15 Volt	100 Pkt	70 Pkt	53 Pcnt	76 Pcnt
1782516852	12.15 Volt	90 Pkt	60 Pkt	50 Pcnt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)