APRS Track Direct

My position About ☰

reset

HS8UFF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8UFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1770143117	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1770142193	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770135385	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770134461	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1770118681	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770118554	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770117630	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770116707	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1770115783	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770114860	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770114066	-	-	-	-	-
1770113937	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770112975	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770112052	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770111128	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770110204	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770108305	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.06 V
1770107297	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1770106373	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770105449	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770104502	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V
1770103579	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1770099884	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.06 V
1770098960	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.1 V
1770098036	0 Pkt	0 Pkt	0 Pkt	31 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)