This is the latest recevied telemetry packets stored in our database for station/object AD4WX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | InetIn* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274394 | 1 Pkts | 1 Pkts | 1 Pkts | 0 | 0 |
| 1766252957 | 0 Pkts | 0 Pkts | 0 Pkts | 0 | 0 |
| 1766249357 | 8 Pkts | 8 Pkts | 12 Pkts | 0 | 0 |
| 1766245757 | 76 Pkts | 75 Pkts | 82 Pkts | 0 | 0 |
| 1766242157 | 127 Pkts | 118 Pkts | 172 Pkts | 0 | 0 |
| 1766238557 | 250 Pkts | 233 Pkts | 202 Pkts | 0 | 0 |
| 1766234957 | 290 Pkts | 274 Pkts | 193 Pkts | 0 | 0 |
| 1766231357 | 340 Pkts | 319 Pkts | 177 Pkts | 0 | 0 |
| 1766227757 | 339 Pkts | 311 Pkts | 412 Pkts | 0 | 0 |
| 1766224157 | 320 Pkts | 301 Pkts | 240 Pkts | 0 | 0 |
| 1766220557 | 267 Pkts | 246 Pkts | 136 Pkts | 0 | 0 |
| 1766216957 | 281 Pkts | 249 Pkts | 184 Pkts | 0 | 0 |
| 1766213357 | 221 Pkts | 196 Pkts | 92 Pkts | 0 | 0 |
| 1766209757 | 216 Pkts | 202 Pkts | 107 Pkts | 0 | 0 |
| 1766206156 | 209 Pkts | 197 Pkts | 132 Pkts | 0 | 0 |
| 1766202557 | 207 Pkts | 199 Pkts | 42 Pkts | 0 | 0 |
| 1766198956 | 215 Pkts | 211 Pkts | 96 Pkts | 0 | 0 |
| 1766195357 | 182 Pkts | 177 Pkts | 51 Pkts | 0 | 0 |
| 1766191757 | 151 Pkts | 148 Pkts | 33 Pkts | 0 | 0 |
| 1766188156 | 71 Pkts | 68 Pkts | 19 Pkts | 0 | 0 |
| 1766184557 | 8 Pkts | 7 Pkts | 1 Pkts | 0 | 0 |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
InetIn: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)