This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-GG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CO2* | CPU* | Temp* | Baro* | Load* |
|---|---|---|---|---|---|
| 1774094486 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774094126 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 41.2 % |
| 1774093766 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.8 % |
| 1774093406 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774093046 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.8 % |
| 1774092686 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774092326 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774091966 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.8 % |
| 1774091606 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774091246 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.8 % |
| 1774090886 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40 % |
| 1774090526 | 200 ppm | 46 C | 29 C | 1014.8 hPa | 40.4 % |
| 1774090166 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774089806 | 200 ppm | 46 C | 28.5 C | 1015.2 hPa | 40.8 % |
| 1774089446 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.8 % |
| 1774089086 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.4 % |
| 1774088726 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40.8 % |
| 1774088366 | 200 ppm | 46 C | 28.5 C | 1015.2 hPa | 41.2 % |
| 1774088006 | 200 ppm | 46 C | 28.5 C | 1015.2 hPa | 40.4 % |
| 1774087646 | 200 ppm | 46 C | 28.5 C | 1014.8 hPa | 40 % |
| 1774087286 | 200 ppm | 46 C | 29 C | 1015.2 hPa | 41.2 % |
| 1774086926 | 190 ppm | 46 C | 29 C | 1015.2 hPa | 41.2 % |
| 1774086566 | 200 ppm | 46 C | 28.5 C | 1015.2 hPa | 40.8 % |
| 1774086206 | 190 ppm | 46 C | 28.5 C | 1015.2 hPa | 40.4 % |
| 1774085846 | 190 ppm | 46 C | 28.5 C | 1015.2 hPa | 40.8 % |
*Used Equation Coefficients:
CO2: 0, 10, 0
CPU: 0, 0.4, 0
Temp: 0, 0.5, -25
Baro: 0, 0.4, 950
Load: 0, 0.4, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)