APRS Track Direct

My position About ☰

reset

HS5SQI-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732271353	30 Pkt	0 Pkt	0 Pkt	-70 dBm	12.24 V
1732270724	30 Pkt	0 Pkt	0 Pkt	-69 dBm	12.26 V
1732270092	22 Pkt	0 Pkt	0 Pkt	-70 dBm	11.92 V
1732269467	13 Pkt	0 Pkt	0 Pkt	-69 dBm	12.33 V
1732268842	8 Pkt	0 Pkt	0 Pkt	-69 dBm	12.26 V
1732268219	5 Pkt	1 Pkt	0 Pkt	-69 dBm	11.98 V
1732267596	2 Pkt	0 Pkt	0 Pkt	-70 dBm	12.3 V
1732266973	10 Pkt	0 Pkt	0 Pkt	-73 dBm	12.02 V
1732266350	11 Pkt	1 Pkt	0 Pkt	-71 dBm	12.02 V
1732265726	6 Pkt	3 Pkt	0 Pkt	-70 dBm	12.3 V
1732265102	3 Pkt	1 Pkt	0 Pkt	-69 dBm	12 V
1732264479	11 Pkt	0 Pkt	0 Pkt	-71 dBm	12.02 V
1732263857	12 Pkt	0 Pkt	0 Pkt	-71 dBm	11.92 V
1732263233	13 Pkt	0 Pkt	0 Pkt	-70 dBm	11.94 V
1732262609	8 Pkt	0 Pkt	0 Pkt	-69 dBm	12.26 V
1732261986	9 Pkt	0 Pkt	0 Pkt	-69 dBm	12.33 V
1732261361	10 Pkt	0 Pkt	0 Pkt	-70 dBm	11.98 V
1732260738	11 Pkt	1 Pkt	1 Pkt	-69 dBm	12.02 V
1732260114	3 Pkt	1 Pkt	0 Pkt	-71 dBm	12.33 V
1732259492	4 Pkt	0 Pkt	0 Pkt	-69 dBm	12.3 V
1732258868	4 Pkt	0 Pkt	0 Pkt	-73 dBm	11.98 V
1732258246	2 Pkt	0 Pkt	0 Pkt	-72 dBm	11.98 V
1732257622	3 Pkt	0 Pkt	0 Pkt	-72 dBm	12.24 V
1732257000	2 Pkt	0 Pkt	0 Pkt	-69 dBm	11.94 V
1732256378	6 Pkt	1 Pkt	0 Pkt	-70 dBm	11.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)