This is the latest recevied telemetry packets stored in our database for station/object IK5ZXH-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774093073 | 1006.4 hPa | 11.8 C deg | 34.1 % | 1011.8 hPa | 0 C deg |
| 1774080350 | 1008 hPa | 8.4 C deg | 42.3 % | 1013.5 hPa | 0 C deg |
| 1774078538 | 1008.3 hPa | 7 C deg | 43.7 % | 1013.8 hPa | 0 C deg |
| 1774074885 | 1008.5 hPa | 5.7 C deg | 43.9 % | 1014.1 hPa | 0 C deg |
| 1774073097 | 1008.5 hPa | 5.4 C deg | 43.7 % | 1014.1 hPa | 0 C deg |
| 1774071263 | 1008.6 hPa | 5.1 C deg | 43.5 % | 1014.2 hPa | 0 C deg |
| 1774067639 | 1008.7 hPa | 5.6 C deg | 42.6 % | 1014.3 hPa | 0 C deg |
| 1774060362 | 1009 hPa | 6.5 C deg | 41.3 % | 1014.5 hPa | 0 C deg |
| 1774054904 | 1009.5 hPa | 6.9 C deg | 40.8 % | 1015 hPa | 0 C deg |
| 1774053098 | 1009.6 hPa | 7.3 C deg | 40.4 % | 1015.1 hPa | 0 C deg |
| 1774042249 | 1009.6 hPa | 9.7 C deg | 37 % | 1015.1 hPa | 0 C deg |
| 1774038578 | 1009.4 hPa | 10.6 C deg | 36.1 % | 1014.9 hPa | 0 C deg |
| 1774036753 | 1009.3 hPa | 11.3 C deg | 34.9 % | 1014.8 hPa | 0 C deg |
| 1774034951 | 1009.1 hPa | 12.1 C deg | 34.6 % | 1014.6 hPa | 0 C deg |
| 1774027687 | 1008.6 hPa | 13.3 C deg | 30.1 % | 1014 hPa | 0 C deg |
| 1774025926 | 1008.3 hPa | 18.1 C deg | 27.7 % | 1013.6 hPa | 0 C deg |
| 1774020424 | 1007.8 hPa | 16.4 C deg | 30.4 % | 1013.1 hPa | 0 C deg |
| 1774018613 | 1007.9 hPa | 15.5 C deg | 32.3 % | 1013.2 hPa | 0 C deg |
| 1774016790 | 1008.1 hPa | 15.1 C deg | 32.2 % | 1013.5 hPa | 0 C deg |
| 1774014986 | 1008.1 hPa | 13.9 C deg | 31.1 % | 1013.5 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)