APRS Track Direct

My position About ☰

reset

IU1KBL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU1KBL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1768269651	14.03 Volt	290 Pkt	70 Pkt	99 Pcnt	2 C
1768268750	14.03 Volt	280 Pkt	80 Pkt	99 Pcnt	2 C
1768268748	14.03 Volt	280 Pkt	80 Pkt	99 Pcnt	2 C
1768267854	14.03 Volt	270 Pkt	80 Pkt	100 Pcnt	2 C
1768266948	14.03 Volt	270 Pkt	70 Pkt	100 Pcnt	2 C
1768265148	14.03 Volt	280 Pkt	70 Pkt	100 Pcnt	2 C
1768263348	14.03 Volt	300 Pkt	70 Pkt	100 Pcnt	2 C
1768262451	14.03 Volt	300 Pkt	70 Pkt	100 Pcnt	2 C
1768261548	14.03 Volt	290 Pkt	60 Pkt	100 Pcnt	2 C
1768259748	14.03 Volt	270 Pkt	70 Pkt	100 Pcnt	2 C
1768258851	14.03 Volt	260 Pkt	80 Pkt	100 Pcnt	2.5 C
1768257948	14.03 Volt	240 Pkt	80 Pkt	100 Pcnt	2.5 C
1768257050	14.03 Volt	240 Pkt	80 Pkt	100 Pcnt	2 C
1768256148	14.03 Volt	240 Pkt	80 Pkt	100 Pcnt	2 C
1768255251	14.03 Volt	260 Pkt	90 Pkt	100 Pcnt	2.5 C
1768254348	14.03 Volt	260 Pkt	80 Pkt	100 Pcnt	2.5 C
1768252548	14.03 Volt	260 Pkt	80 Pkt	100 Pcnt	2.5 C
1768250749	14.03 Volt	270 Pkt	70 Pkt	99 Pcnt	2.5 C
1768248949	14.03 Volt	290 Pkt	80 Pkt	98 Pcnt	3 C
1768248052	14.03 Volt	280 Pkt	80 Pkt	98 Pcnt	3.5 C
1768247149	14.03 Volt	290 Pkt	90 Pkt	98 Pcnt	3.5 C
1768243549	14.03 Volt	320 Pkt	80 Pkt	99 Pcnt	3.5 C
1768241749	14.03 Volt	330 Pkt	80 Pkt	99 Pcnt	4 C
1768240851	14.03 Volt	330 Pkt	80 Pkt	99 Pcnt	4 C
1768239949	14.03 Volt	330 Pkt	90 Pkt	99 Pcnt	4.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)