APRS Track Direct

My position About ☰

reset

DM6CS-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM6CS-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	QNH*	Temp.out*
1773505168	944.2 hPa	15.2 C deg	1001.7 hPa	0 C deg
1773503390	943.7 hPa	15.8 C deg	1001.1 hPa	0 C deg
1773499771	942.9 hPa	16.5 C deg	1000.1 hPa	0 C deg
1773497963	942.7 hPa	16.9 C deg	999.8 hPa	0 C deg
1773496168	942.3 hPa	17.2 C deg	999.3 hPa	0 C deg
1773492563	941.5 hPa	17.8 C deg	998.3 hPa	0 C deg
1773488962	941.3 hPa	17.7 C deg	998.1 hPa	0 C deg
1773483561	941.6 hPa	16.2 C deg	998.7 hPa	0 C deg
1773481764	941.5 hPa	15.5 C deg	998.8 hPa	0 C deg
1773479961	941.2 hPa	14.8 C deg	998.6 hPa	0 C deg
1773476368	940.8 hPa	13.4 C deg	998.4 hPa	0 C deg
1773470953	940.3 hPa	12.6 C deg	998.1 hPa	0 C deg
1773465568	940.5 hPa	12.8 C deg	998.3 hPa	0 C deg
1773458358	941.3 hPa	13.6 C deg	999 hPa	0 C deg
1773456558	941.9 hPa	13.8 C deg	999.5 hPa	0 C deg
1773451152	943.5 hPa	14.6 C deg	1001 hPa	0 C deg
1773447555	944.8 hPa	15.2 C deg	1002.3 hPa	0 C deg
1773445752	945.3 hPa	15.6 C deg	1002.7 hPa	0 C deg
1773443952	945.7 hPa	16 C deg	1003.1 hPa	0 C deg
1773434952	947.4 hPa	18.3 C deg	1004.4 hPa	0 C deg
1773433144	947.7 hPa	19.1 C deg	1004.6 hPa	0 C deg
1773429556	948.2 hPa	20.2 C deg	1004.9 hPa	0 C deg
1773427759	948.6 hPa	21 C deg	1005.2 hPa	0 C deg
1773425958	948.9 hPa	21.6 C deg	1005.4 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)