This is the latest recevied telemetry packets stored in our database for station/object KC6SSM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762313318 | 80 | 102 | 0 | 0 | 0 |
| 1762309718 | 80 | 102 | 0 | 0 | 0 |
| 1762306116 | 80 | 102 | 0 | 0 | 0 |
| 1762302515 | 80 | 102 | 0 | 0 | 0 |
| 1762298914 | 80 | 102 | 0 | 0 | 0 |
| 1762295313 | 80 | 102 | 0 | 0 | 0 |
| 1762291711 | 80 | 102 | 0 | 0 | 0 |
| 1762288108 | 80 | 102 | 0 | 0 | 0 |
| 1762284505 | 80 | 101 | 0 | 0 | 0 |
| 1762280904 | 80 | 101 | 0 | 0 | 0 |
| 1762277303 | 80 | 101 | 0 | 0 | 0 |
| 1762273699 | 80 | 100 | 0 | 0 | 0 |
| 1762270098 | 80 | 101 | 0 | 0 | 0 |
| 1762266497 | 80 | 100 | 0 | 0 | 0 |
| 1762262896 | 80 | 100 | 0 | 0 | 0 |
| 1762259293 | 80 | 101 | 0 | 0 | 0 |
| 1762255692 | 80 | 101 | 0 | 0 | 0 |
| 1762252091 | 80 | 101 | 0 | 0 | 0 |
| 1762248490 | 80 | 101 | 0 | 0 | 0 |
| 1762244889 | 80 | 101 | 0 | 0 | 0 |
| 1762241288 | 80 | 101 | 0 | 0 | 0 |
| 1762237687 | 80 | 101 | 0 | 0 | 0 |
| 1762234086 | 80 | 101 | 0 | 0 | 0 |
| 1762230485 | 80 | 101 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)