APRS Track Direct

My position About ☰

reset

LZ2KAC-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ2KAC-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274342	0 Pkt	0 Pkt	-67 dBm	14.66 V
1774102426	43 Pkt	0 Pkt	-61 dBm	14.6 V
1774100616	28 Pkt	2 Pkt	-61 dBm	14.62 V
1774098806	43 Pkt	0 Pkt	-60 dBm	14.6 V
1774096996	33 Pkt	1 Pkt	-61 dBm	14.62 V
1774095186	35 Pkt	1 Pkt	-59 dBm	14.62 V
1774093376	32 Pkt	1 Pkt	-60 dBm	14.62 V
1774091566	40 Pkt	2 Pkt	-60 dBm	14.62 V
1774089756	30 Pkt	1 Pkt	-60 dBm	14.6 V
1774087946	41 Pkt	0 Pkt	-61 dBm	14.6 V
1774086135	34 Pkt	1 Pkt	-60 dBm	14.6 V
1774084326	35 Pkt	0 Pkt	-59 dBm	14.62 V
1774082516	30 Pkt	2 Pkt	-60 dBm	14.62 V
1774080705	42 Pkt	1 Pkt	-60 dBm	14.62 V
1774078895	33 Pkt	2 Pkt	-60 dBm	14.6 V
1774077085	37 Pkt	0 Pkt	-62 dBm	14.6 V
1774075275	33 Pkt	0 Pkt	-59 dBm	14.6 V
1774073465	41 Pkt	3 Pkt	-59 dBm	14.6 V
1774071655	36 Pkt	1 Pkt	-61 dBm	14.6 V
1774069845	42 Pkt	0 Pkt	-61 dBm	14.62 V
1774068035	30 Pkt	2 Pkt	-61 dBm	14.6 V
1774066225	42 Pkt	0 Pkt	-61 dBm	14.6 V
1774064415	31 Pkt	0 Pkt	-60 dBm	14.6 V
1774062605	43 Pkt	2 Pkt	-60 dBm	14.6 V
1774060795	28 Pkt	1 Pkt	-60 dBm	14.6 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)