APRS Track Direct

My position About ☰

reset

9W3FAB-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W3FAB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274435	21 Pkt	29 Pkt	-69 dBm	5.23 V
1766113807	15 Pkt	23 Pkt	-65 dBm	5.21 V
1766111980	29 Pkt	19 Pkt	-66 dBm	5.23 V
1766110153	32 Pkt	30 Pkt	-66 dBm	5.21 V
1766108325	27 Pkt	10 Pkt	-65 dBm	5.21 V
1766106497	22 Pkt	21 Pkt	-67 dBm	5.23 V
1766104671	27 Pkt	29 Pkt	-67 dBm	5.25 V
1766102844	24 Pkt	4 Pkt	-65 dBm	5.21 V
1766101021	31 Pkt	11 Pkt	-68 dBm	5.21 V
1766099192	15 Pkt	28 Pkt	-68 dBm	5.23 V
1766097364	4 Pkt	26 Pkt	-69 dBm	5.21 V
1766095537	3 Pkt	19 Pkt	-67 dBm	5.21 V
1766093710	7 Pkt	5 Pkt	-68 dBm	5.23 V
1766091885	12 Pkt	5 Pkt	-66 dBm	5.21 V
1766090059	14 Pkt	2 Pkt	-67 dBm	5.21 V
1766088232	17 Pkt	3 Pkt	-64 dBm	5.21 V
1766086406	18 Pkt	2 Pkt	-67 dBm	5.23 V
1766084580	11 Pkt	3 Pkt	-62 dBm	5.23 V
1766082753	21 Pkt	2 Pkt	-65 dBm	5.23 V
1766080927	13 Pkt	5 Pkt	-66 dBm	5.23 V
1766079101	13 Pkt	3 Pkt	-63 dBm	5.21 V
1766077275	14 Pkt	4 Pkt	-63 dBm	5.23 V
1766075449	19 Pkt	4 Pkt	-66 dBm	5.21 V
1766073622	15 Pkt	3 Pkt	-66 dBm	5.21 V
1766071796	14 Pkt	2 Pkt	-67 dBm	5.21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)