APRS Track Direct

My position About ☰

reset

IR2UFW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UFW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1836274580	41 Pkt	220 Pkt	0 Pkt	0.73 Pcnt	89 Pcnt
1836274431	28 Pkt	210 Pkt	0 Pkt	0.73 Pcnt	89 Pcnt
1836274280	34 Pkt	220 Pkt	0 Pkt	0.73 Pcnt	89 Pcnt
1836274130	30 Pkt	220 Pkt	0 Pkt	0.73 Pcnt	89 Pcnt
1836273980	31 Pkt	220 Pkt	0 Pkt	0.73 Pcnt	89 Pcnt
1762326954	40 Pkt	270 Pkt	4 Pkt	0.85 Pcnt	85 Pcnt
1762326654	37 Pkt	270 Pkt	9 Pkt	0.85 Pcnt	84 Pcnt
1762326354	35 Pkt	280 Pkt	6 Pkt	0.85 Pcnt	84 Pcnt
1762326053	39 Pkt	280 Pkt	6 Pkt	0.84 Pcnt	85 Pcnt
1762325753	50 Pkt	270 Pkt	3 Pkt	0.84 Pcnt	85 Pcnt
1762325453	60 Pkt	280 Pkt	0 Pkt	0.84 Pcnt	86 Pcnt
1762325152	52 Pkt	260 Pkt	0 Pkt	0.84 Pcnt	85 Pcnt
1762324852	37 Pkt	250 Pkt	0 Pkt	0.84 Pcnt	85 Pcnt
1762324552	31 Pkt	250 Pkt	0 Pkt	0.84 Pcnt	84 Pcnt
1762324252	33 Pkt	240 Pkt	0 Pkt	0.84 Pcnt	84 Pcnt
1762323951	44 Pkt	240 Pkt	1 Pkt	0.84 Pcnt	84 Pcnt
1762323651	46 Pkt	230 Pkt	1 Pkt	0.84 Pcnt	83 Pcnt
1762323351	41 Pkt	220 Pkt	0 Pkt	0.84 Pcnt	84 Pcnt
1762323050	33 Pkt	210 Pkt	0 Pkt	0.84 Pcnt	85 Pcnt
1762322750	32 Pkt	210 Pkt	0 Pkt	0.84 Pcnt	86 Pcnt
1762322450	42 Pkt	210 Pkt	0 Pkt	0.84 Pcnt	84 Pcnt
1762322150	41 Pkt	210 Pkt	0 Pkt	0.84 Pcnt	84 Pcnt
1762321849	38 Pkt	190 Pkt	0 Pkt	0.84 Pcnt	84 Pcnt
1762321549	30 Pkt	190 Pkt	0 Pkt	0.84 Pcnt	85 Pcnt
1762321249	29 Pkt	180 Pkt	0 Pkt	0.84 Pcnt	86 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)