APRS Track Direct

My position About ☰

reset

W0CHP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0CHP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1786726987	2.26 Load	27.8 DegC	2939 Mb	21764 Pkt	12498 Pkt
1786726172	2.13 Load	27.8 DegC	2918 Mb	23457 Pkt	14191 Pkt
1786725362	1.69 Load	27.8 DegC	2940 Mb	20896 Pkt	11493 Pkt
1786724542	2.25 Load	27.8 DegC	2747 Mb	23228 Pkt	13616 Pkt
1786723758	2.77 Load	27.8 DegC	2938 Mb	21540 Pkt	11818 Pkt
1786722967	2.79 Load	27.8 DegC	2943 Mb	24111 Pkt	14756 Pkt
1786722186	1.91 Load	27.8 DegC	2838 Mb	21312 Pkt	11885 Pkt
1786720552	2.1 Load	27.8 DegC	2943 Mb	23118 Pkt	13630 Pkt
1786719732	2.44 Load	27.8 DegC	2939 Mb	22083 Pkt	12565 Pkt
1786718897	3.48 Load	27.8 DegC	2923 Mb	24199 Pkt	14988 Pkt
1786718092	2.62 Load	27.8 DegC	2946 Mb	24837 Pkt	15281 Pkt
1786717272	2.76 Load	27.8 DegC	2855 Mb	24951 Pkt	15766 Pkt
1786716464	2.73 Load	27.8 DegC	2942 Mb	23679 Pkt	14000 Pkt
1786715682	3.24 Load	27.8 DegC	2861 Mb	23794 Pkt	14536 Pkt
1786714892	2.71 Load	27.8 DegC	2858 Mb	21428 Pkt	12018 Pkt
1786713312	3.01 Load	27.8 DegC	2858 Mb	23221 Pkt	13565 Pkt
1786712507	3.27 Load	27.8 DegC	2856 Mb	21586 Pkt	12081 Pkt
1786711712	2.73 Load	27.8 DegC	2948 Mb	24409 Pkt	15023 Pkt
1786710887	2.23 Load	27.8 DegC	2856 Mb	21180 Pkt	11502 Pkt
1786710062	2.47 Load	27.8 DegC	2857 Mb	23466 Pkt	13502 Pkt
1786709217	2.59 Load	27.8 DegC	2924 Mb	22027 Pkt	11456 Pkt
1786708417	2.52 Load	27.8 DegC	2936 Mb	23020 Pkt	12941 Pkt
1786707647	2.33 Load	27.8 DegC	2856 Mb	21191 Pkt	11565 Pkt
1786706102	2.25 Load	27.8 DegC	2859 Mb	23156 Pkt	13348 Pkt
1786705277	2.69 Load	27.8 DegC	2936 Mb	22039 Pkt	11422 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)