This is the latest recevied telemetry packets stored in our database for station/object DL2JA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1758199254 | 968.3 hPa | 24.2 C deg | 62.5 % | 21 - | 0 C deg |
| 1758197448 | 968.5 hPa | 23.5 C deg | 63.6 % | 21 - | 0 C deg |
| 1758195613 | 968.7 hPa | 22.9 C deg | 65.1 % | 22 - | 0 C deg |
| 1758191984 | 969 hPa | 21.2 C deg | 66.9 % | 23 - | 0 C deg |
| 1758190167 | 969 hPa | 20.4 C deg | 68.3 % | 24 - | 0 C deg |
| 1758188356 | 969.1 hPa | 19.1 C deg | 69.5 % | 25 - | 0 C deg |
| 1758186537 | 969.1 hPa | 17.7 C deg | 71.2 % | 27 - | 0 C deg |
| 1758182906 | 969.2 hPa | 15.7 C deg | 71.8 % | 31 - | 0 C deg |
| 1758181091 | 969.1 hPa | 15.2 C deg | 71 % | 33 - | 0 C deg |
| 1758179278 | 968.8 hPa | 15 C deg | 69.8 % | 34 - | 0 C deg |
| 1758177464 | 968.7 hPa | 14.6 C deg | 69.5 % | 35 - | 0 C deg |
| 1758175649 | 968.5 hPa | 14.6 C deg | 68.7 % | 36 - | 0 C deg |
| 1758173834 | 968.3 hPa | 14.6 C deg | 68.3 % | 36 - | 0 C deg |
| 1758172019 | 968.2 hPa | 14.6 C deg | 68.1 % | 36 - | 0 C deg |
| 1758137537 | 968.1 hPa | 18.3 C deg | 61.3 % | 42 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)