APRS Track Direct

My position About ☰

reset

SM4XRT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SM4XRT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274119	16 Pkt	49 Pkt	6 Pkt	-61 dBm	0.08 V
1762337086	36 Pkt	53 Pkt	0 Pkt	-58 dBm	0.08 V
1762335261	24 Pkt	52 Pkt	0 Pkt	-59 dBm	0.08 V
1762333435	16 Pkt	51 Pkt	0 Pkt	-59 dBm	0.08 V
1762331611	23 Pkt	53 Pkt	0 Pkt	-59 dBm	0.08 V
1762329785	19 Pkt	56 Pkt	0 Pkt	-58 dBm	0.08 V
1762327960	15 Pkt	53 Pkt	0 Pkt	-58 dBm	0.08 V
1762326135	18 Pkt	54 Pkt	0 Pkt	-59 dBm	0.08 V
1762324310	14 Pkt	68 Pkt	0 Pkt	-59 dBm	0.08 V
1762322485	17 Pkt	52 Pkt	0 Pkt	-57 dBm	0.08 V
1762320660	19 Pkt	52 Pkt	0 Pkt	-58 dBm	0.08 V
1762318835	24 Pkt	50 Pkt	0 Pkt	-58 dBm	0.08 V
1762317009	16 Pkt	56 Pkt	0 Pkt	-59 dBm	0.08 V
1762315185	23 Pkt	49 Pkt	0 Pkt	-59 dBm	0.08 V
1762313360	26 Pkt	51 Pkt	0 Pkt	-59 dBm	0.08 V
1762311535	16 Pkt	53 Pkt	0 Pkt	-60 dBm	0.08 V
1762309708	5 Pkt	3 Pkt	0 Pkt	-57 dBm	0.08 V
1762307470	23 Pkt	49 Pkt	0 Pkt	-58 dBm	0.08 V
1762305644	31 Pkt	55 Pkt	0 Pkt	-58 dBm	0.08 V
1762303816	33 Pkt	50 Pkt	0 Pkt	-58 dBm	0.08 V
1762301990	5 Pkt	2 Pkt	0 Pkt	-58 dBm	0.08 V
1762296754	17 Pkt	55 Pkt	0 Pkt	-57 dBm	0.08 V
1762294928	23 Pkt	51 Pkt	0 Pkt	-60 dBm	0.08 V
1762293102	24 Pkt	56 Pkt	0 Pkt	-59 dBm	0.08 V
1762291278	22 Pkt	50 Pkt	0 Pkt	-59 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)