APRS Track Direct

My position About ☰

reset

SNOWMS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SNOWMS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1774131608	14.3 Volt	90 Pkt	30 Pkt	66 Pcnt
1774131607	14.3 Volt	90 Pkt	30 Pkt	66 Pcnt
1774131307	14.3 Volt	90 Pkt	20 Pkt	66 Pcnt
1774131008	14.3 Volt	90 Pkt	20 Pkt	65 Pcnt
1774131007	14.3 Volt	90 Pkt	20 Pkt	65 Pcnt
1774130707	14.3 Volt	90 Pkt	20 Pkt	65 Pcnt
1774130408	14.3 Volt	90 Pkt	20 Pkt	65 Pcnt
1774130407	14.3 Volt	90 Pkt	20 Pkt	65 Pcnt
1774130107	14.3 Volt	80 Pkt	20 Pkt	65 Pcnt
1774129808	14.3 Volt	80 Pkt	20 Pkt	66 Pcnt
1774129807	14.3 Volt	80 Pkt	20 Pkt	66 Pcnt
1774129507	14.3 Volt	80 Pkt	20 Pkt	67 Pcnt
1774129208	14.3 Volt	80 Pkt	20 Pkt	69 Pcnt
1774129207	14.3 Volt	80 Pkt	20 Pkt	69 Pcnt
1774128907	14.3 Volt	90 Pkt	20 Pkt	69 Pcnt
1774128608	14.3 Volt	80 Pkt	20 Pkt	66 Pcnt
1774128607	14.3 Volt	80 Pkt	20 Pkt	66 Pcnt
1774128307	14.3 Volt	90 Pkt	20 Pkt	69 Pcnt
1774128008	14.3 Volt	80 Pkt	20 Pkt	67 Pcnt
1774128008	14.3 Volt	80 Pkt	20 Pkt	67 Pcnt
1774127707	14.3 Volt	80 Pkt	20 Pkt	67 Pcnt
1774127408	14.3 Volt	80 Pkt	20 Pkt	65 Pcnt
1774127407	14.3 Volt	80 Pkt	20 Pkt	65 Pcnt
1774127107	14.3 Volt	90 Pkt	20 Pkt	67 Pcnt
1774126810	14.3 Volt	80 Pkt	20 Pkt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)