APRS Track Direct

My position About ☰

reset

S53UAN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S53UAN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	U1*	U2*	Rx1h*	Eff*
1778040814	10 C	12.45 Volt	11.7 Volt	1520 Pkt	63 Pcnt
1778040515	10 C	12.45 Volt	11.7 Volt	1510 Pkt	63 Pcnt
1778039914	10 C	12.45 Volt	11.8 Volt	1510 Pkt	63 Pcnt
1778039014	10 C	12.45 Volt	11.8 Volt	1490 Pkt	63 Pcnt
1778038114	10 C	12.45 Volt	11.7 Volt	1530 Pkt	63 Pcnt
1778037522	10 C	12.45 Volt	11.8 Volt	1530 Pkt	63 Pcnt
1778037214	10 C	12.45 Volt	11.7 Volt	1540 Pkt	63 Pcnt
1778036314	10 C	12.45 Volt	11.8 Volt	1530 Pkt	63 Pcnt
1778035414	10 C	12.45 Volt	11.8 Volt	1540 Pkt	63 Pcnt
1778034530	10 C	12.45 Volt	11.8 Volt	1520 Pkt	63 Pcnt
1778034514	10 C	12.45 Volt	11.8 Volt	1520 Pkt	63 Pcnt
1778033614	10 C	12.45 Volt	11.7 Volt	1470 Pkt	63 Pcnt
1778032714	10 C	12.45 Volt	11.7 Volt	1480 Pkt	63 Pcnt
1778031814	10 C	12.45 Volt	11.7 Volt	1520 Pkt	63 Pcnt
1778031524	10.5 C	12.45 Volt	11.7 Volt	1530 Pkt	63 Pcnt
1778030914	10 C	12.45 Volt	11.7 Volt	1520 Pkt	63 Pcnt
1778030014	10.5 C	12.45 Volt	11.7 Volt	1550 Pkt	63 Pcnt
1778029114	10.5 C	12.45 Volt	11.7 Volt	1520 Pkt	63 Pcnt
1778028530	10.5 C	12.45 Volt	11.7 Volt	1490 Pkt	63 Pcnt
1778028214	10.5 C	12.45 Volt	11.7 Volt	1470 Pkt	63 Pcnt
1778027314	10.5 C	12.45 Volt	11.7 Volt	1480 Pkt	63 Pcnt
1778026414	10.5 C	12.45 Volt	11.7 Volt	1470 Pkt	63 Pcnt
1778025530	10.5 C	12.45 Volt	11.7 Volt	1540 Pkt	63 Pcnt
1778025515	10.5 C	12.45 Volt	11.7 Volt	1540 Pkt	63 Pcnt
1778024614	10.5 C	12.45 Volt	11.8 Volt	1560 Pkt	63 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

U1: 0, 0.075, 0

U2: 0, 0.1, 0

Rx1h: 0, 10, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)