This is the latest recevied telemetry packets stored in our database for station/object BR9AA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782517694 | 156 | 163 | 1 | 0 | 0 |
| 1782514080 | 154 | 161 | 1 | 0 | 0 |
| 1782510467 | 154 | 160 | 2 | 0 | 0 |
| 1782506854 | 154 | 160 | 1 | 0 | 0 |
| 1782503245 | 154 | 161 | 1 | 0 | 0 |
| 1782499633 | 154 | 161 | 1 | 0 | 0 |
| 1782496020 | 155 | 161 | 1 | 0 | 0 |
| 1782492407 | 155 | 162 | 1 | 0 | 0 |
| 1782488792 | 155 | 162 | 2 | 0 | 0 |
| 1782485179 | 155 | 162 | 2 | 0 | 0 |
| 1782481565 | 155 | 162 | 1 | 0 | 0 |
| 1782477938 | 156 | 163 | 2 | 0 | 0 |
| 1782474326 | 157 | 163 | 1 | 0 | 0 |
| 1782470713 | 158 | 173 | 1 | 0 | 0 |
| 1782467101 | 160 | 173 | 1 | 0 | 0 |
| 1782463484 | 161 | 173 | 1 | 0 | 0 |
| 1782459873 | 161 | 173 | 1 | 0 | 0 |
| 1782456261 | 159 | 173 | 1 | 0 | 0 |
| 1782452643 | 159 | 173 | 1 | 0 | 0 |
| 1782449030 | 160 | 173 | 1 | 0 | 0 |
| 1782445411 | 161 | 173 | 1 | 0 | 0 |
| 1782441791 | 160 | 178 | 2 | 0 | 0 |
| 1782438178 | 159 | 178 | 1 | 0 | 0 |
| 1782434559 | 157 | 171 | 2 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)