APRS Track Direct

My position About ☰

reset

K2CSN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2CSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1750189370	64 Pkts	56 Pkts	17 Pkts	24 C
1750185770	61 Pkts	53 Pkts	16 Pkts	25 C
1750182170	68 Pkts	60 Pkts	14 Pkts	25 C
1750178570	56 Pkts	48 Pkts	17 Pkts	25 C
1750174970	68 Pkts	60 Pkts	16 Pkts	25 C
1750171370	57 Pkts	49 Pkts	10 Pkts	25 C
1750167770	69 Pkts	61 Pkts	18 Pkts	25 C
1750164170	67 Pkts	59 Pkts	15 Pkts	25 C
1750160570	62 Pkts	54 Pkts	10 Pkts	25 C
1750156970	56 Pkts	48 Pkts	14 Pkts	25 C
1750153369	50 Pkts	42 Pkts	14 Pkts	25 C
1750149769	41 Pkts	33 Pkts	12 Pkts	25 C
1750146169	50 Pkts	42 Pkts	9 Pkts	25 C
1750142569	44 Pkts	36 Pkts	12 Pkts	25 C
1750138970	34 Pkts	29 Pkts	8 Pkts	25 C
1750135370	43 Pkts	35 Pkts	11 Pkts	25 C
1750131770	31 Pkts	23 Pkts	5 Pkts	25 C
1750128170	46 Pkts	41 Pkts	12 Pkts	25 C
1750124570	41 Pkts	35 Pkts	9 Pkts	25 C
1750120970	32 Pkts	27 Pkts	12 Pkts	25 C
1750117370	40 Pkts	32 Pkts	9 Pkts	24 C
1750113770	50 Pkts	42 Pkts	8 Pkts	24 C
1750110170	36 Pkts	28 Pkts	13 Pkts	24 C
1750106571	40 Pkts	32 Pkts	12 Pkts	24 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)