APRS Track Direct

My position About ☰

reset

HS6KLJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1774152504	0 Pkt	1 Pkt	-42 dBm	0.08 V
1774150682	0 Pkt	1 Pkt	-36 dBm	0.08 V
1774149452	0 Pkt	1 Pkt	-40 dBm	0.08 V
1774147630	0 Pkt	2 Pkt	-36 dBm	0.08 V
1774145807	0 Pkt	2 Pkt	-34 dBm	0.08 V
1774143987	0 Pkt	1 Pkt	-52 dBm	0.1 V
1774142163	29 Pkt	0 Pkt	-52 dBm	0.1 V
1774140337	13 Pkt	0 Pkt	-54 dBm	0.1 V
1774138511	35 Pkt	0 Pkt	-54 dBm	0.1 V
1774136683	0 Pkt	0 Pkt	-52 dBm	0.1 V
1774134861	0 Pkt	0 Pkt	-51 dBm	0.1 V
1774133039	0 Pkt	1 Pkt	-51 dBm	0.1 V
1774131217	0 Pkt	3 Pkt	-51 dBm	0.1 V
1774129395	0 Pkt	2 Pkt	-51 dBm	0.1 V
1774127573	0 Pkt	0 Pkt	-52 dBm	0.1 V
1774125751	0 Pkt	1 Pkt	-50 dBm	0.1 V
1774123928	0 Pkt	1 Pkt	-51 dBm	0.1 V
1774122070	0 Pkt	1 Pkt	-52 dBm	0.1 V
1774120248	0 Pkt	0 Pkt	-52 dBm	0.08 V
1774118426	0 Pkt	1 Pkt	-52 dBm	0.1 V
1774116604	0 Pkt	3 Pkt	-52 dBm	0.1 V
1774114782	0 Pkt	0 Pkt	-52 dBm	0.12 V
1774112960	0 Pkt	2 Pkt	-53 dBm	0.1 V
1774111138	0 Pkt	0 Pkt	-52 dBm	0.1 V
1774109315	0 Pkt	2 Pkt	-52 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)