This is the latest recevied telemetry packets stored in our database for station/object DF0OH-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RH_out* | T_out* | RH_in* | T_in* | Fan%* |
|---|---|---|---|---|---|
| 1758189316 | 53.1 % | 26.3 C | 83.3 % | 17.8 C | 15 % on |
| 1758188039 | 64.6 % | 21 C | 83.3 % | 17.8 C | 5 % on |
| 1758186797 | 71.4 % | 18.8 C | 83.3 % | 17.8 C | 84 % on |
| 1758185499 | 76.3 % | 17.9 C | 83.3 % | 17.8 C | 61 % on |
| 1758184150 | 76.7 % | 17 C | 83.2 % | 17.8 C | 100 % on |
| 1758182893 | 80.9 % | 16.4 C | 83.2 % | 17.8 C | 100 % on |
| 1758181574 | 84.2 % | 15.6 C | 83.2 % | 17.8 C | 100 % on |
| 1758180341 | 85.9 % | 14.9 C | 83.2 % | 17.8 C | 100 % on |
| 1758179087 | 87.3 % | 14.5 C | 83.2 % | 17.8 C | 100 % on |
| 1758177811 | 88.2 % | 14 C | 83.2 % | 17.8 C | 100 % on |
| 1758176567 | 88.8 % | 13.7 C | 83.2 % | 17.8 C | 100 % on |
| 1758175280 | 88.8 % | 13.3 C | 83.2 % | 17.8 C | 100 % on |
| 1758174002 | 88.6 % | 13.2 C | 83.1 % | 17.8 C | 100 % on |
| 1758172689 | 88.4 % | 13 C | 83.1 % | 17.8 C | 100 % on |
| 1758171408 | 88.1 % | 13.1 C | 83.1 % | 17.8 C | 100 % on |
| 1758170129 | 88.1 % | 13 C | 83.1 % | 17.8 C | 100 % on |
| 1758168896 | 87.6 % | 12.8 C | 83.1 % | 17.8 C | 100 % on |
| 1758167621 | 86.2 % | 13.1 C | 83 % | 17.9 C | 100 % on |
| 1758166345 | 85.3 % | 13.5 C | 83 % | 17.9 C | 100 % on |
| 1758165091 | 84.9 % | 13.7 C | 83 % | 17.9 C | 100 % on |
| 1758163792 | 83.9 % | 13.7 C | 82.9 % | 17.9 C | 100 % on |
| 1758162550 | 83.4 % | 13.8 C | 82.9 % | 17.9 C | 100 % on |
| 1758161305 | 83.1 % | 14 C | 82.9 % | 17.9 C | 100 % on |
| 1758160030 | 82.9 % | 14.1 C | 82.8 % | 17.9 C | 100 % on |
| 1758158776 | 83 % | 14.1 C | 82.9 % | 17.9 C | 100 % on |
*Used Equation Coefficients:
RH_out: 0, 1, 0
T_out: 0, 1, -100
RH_in: 0, 1, 0
T_in: 0, 1, -100
Fan%: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)