This is the latest recevied telemetry packets stored in our database for station/object OE3TEC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758209584 | 999.5 hPa | 37.2 C deg | 29.2 % | 1023.4 hPa | 0 C deg |
| 1758207795 | 999.4 hPa | 36.5 C deg | 29.7 % | 1023.4 hPa | 0 C deg |
| 1758205997 | 999.5 hPa | 36.2 C deg | 29.6 % | 1023.5 hPa | 0 C deg |
| 1758193266 | 1001.1 hPa | 27.3 C deg | 34.6 % | 1025.8 hPa | 0 C deg |
| 1758187493 | 1001.5 hPa | 23.3 C deg | 37.3 % | 1026.6 hPa | 0 C deg |
| 1758185693 | 1001.8 hPa | 22.4 C deg | 37.3 % | 1027 hPa | 0 C deg |
| 1758182094 | 1002 hPa | 21.1 C deg | 37 % | 1027.3 hPa | 0 C deg |
| 1758180293 | 1002.2 hPa | 20.6 C deg | 37.7 % | 1027.5 hPa | 0 C deg |
| 1758178493 | 1001.8 hPa | 20.2 C deg | 38.5 % | 1027.1 hPa | 0 C deg |
| 1758176693 | 1001.5 hPa | 19.9 C deg | 38.8 % | 1026.8 hPa | 0 C deg |
| 1758174893 | 1001.3 hPa | 19.6 C deg | 38.6 % | 1026.7 hPa | 0 C deg |
| 1758173086 | 1001.3 hPa | 19.4 C deg | 37.7 % | 1026.7 hPa | 0 C deg |
| 1758171287 | 1001.2 hPa | 19.2 C deg | 36.6 % | 1026.7 hPa | 0 C deg |
| 1758135397 | 999.9 hPa | 23.5 C deg | 35.6 % | 1024.9 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)