APRS Track Direct

My position About ☰

reset

W6IA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6IA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Rx10m*	Rx1h*	Eff*	Eff1h*
1836274542	59 Pkt	350 Pkt	69 Pcnt	73 Pcnt
1774138012	9 Pkt	60 Pkt	65 Pcnt	29 Pcnt
1774136213	8 Pkt	40 Pkt	65 Pcnt	23 Pcnt
1774134413	2 Pkt	60 Pkt	65 Pcnt	30 Pcnt
1774132613	6 Pkt	90 Pkt	65 Pcnt	39 Pcnt
1774130813	15 Pkt	160 Pkt	65 Pcnt	44 Pcnt
1774129013	28 Pkt	170 Pkt	65 Pcnt	43 Pcnt
1774127213	18 Pkt	150 Pkt	65 Pcnt	43 Pcnt
1774125413	24 Pkt	160 Pkt	66 Pcnt	48 Pcnt
1774123613	30 Pkt	210 Pkt	66 Pcnt	55 Pcnt
1774121813	35 Pkt	240 Pkt	66 Pcnt	64 Pcnt
1774120013	36 Pkt	250 Pkt	66 Pcnt	65 Pcnt
1774118213	46 Pkt	250 Pkt	66 Pcnt	71 Pcnt
1774116414	33 Pkt	230 Pkt	66 Pcnt	88 Pcnt
1774114614	26 Pkt	270 Pkt	66 Pcnt	95 Pcnt
1774112814	51 Pkt	300 Pkt	66 Pcnt	97 Pcnt
1774111014	51 Pkt	280 Pkt	66 Pcnt	93 Pcnt
1774109214	50 Pkt	240 Pkt	65 Pcnt	88 Pcnt
1774107414	29 Pkt	240 Pkt	65 Pcnt	83 Pcnt
1774105614	31 Pkt	310 Pkt	65 Pcnt	85 Pcnt
1774103814	64 Pkt	360 Pkt	65 Pcnt	92 Pcnt
1774102014	55 Pkt	320 Pkt	65 Pcnt	88 Pcnt
1774100214	55 Pkt	270 Pkt	65 Pcnt	77 Pcnt
1774098415	24 Pkt	270 Pkt	65 Pcnt	83 Pcnt
1774096615	51 Pkt	290 Pkt	65 Pcnt	95 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Eff: 0, 1, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)