This is the latest recevied telemetry packets stored in our database for station/object DL0DE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1754145466 | 999.1 hPa | 28.4 C deg | 39.8 % | 339 - | 0 C deg |
| 1754143666 | 998.7 hPa | 28.4 C deg | 40.1 % | 333 - | 0 C deg |
| 1754141866 | 998.7 hPa | 28.4 C deg | 40.5 % | 332 - | 0 C deg |
| 1754140066 | 998.6 hPa | 28.5 C deg | 40.8 % | 325 - | 0 C deg |
| 1754138266 | 998.4 hPa | 28.5 C deg | 41.3 % | 319 - | 0 C deg |
| 1754136466 | 998.2 hPa | 28.6 C deg | 41.9 % | 309 - | 0 C deg |
| 1754134666 | 998.2 hPa | 28.6 C deg | 43.3 % | 298 - | 0 C deg |
| 1754132865 | 998 hPa | 25 C deg | 51.4 % | 266 - | 0 C deg |
| 1754120549 | 996.9 hPa | 31.5 C deg | 29.6 % | 404 - | 0 C deg |
| 1754118749 | 996.7 hPa | 31.5 C deg | 29.6 % | 407 - | 0 C deg |
| 1754115149 | 996.8 hPa | 31.6 C deg | 29.5 % | 401 - | 0 C deg |
| 1754106148 | 997 hPa | 31.6 C deg | 29.7 % | 404 - | 0 C deg |
| 1754104348 | 997.1 hPa | 31.6 C deg | 29.7 % | 403 - | 0 C deg |
| 1754095347 | 997.4 hPa | 31.8 C deg | 29.7 % | 394 - | 0 C deg |
| 1754088152 | 997.4 hPa | 32.1 C deg | 29.7 % | 384 - | 0 C deg |
| 1754086353 | 997.5 hPa | 32.2 C deg | 29.7 % | 387 - | 0 C deg |
| 1754082746 | 997.5 hPa | 32.2 C deg | 29.8 % | 380 - | 0 C deg |
| 1754079146 | 997.4 hPa | 32.5 C deg | 29.6 % | 376 - | 0 C deg |
| 1754068353 | 996.5 hPa | 32.9 C deg | 29.2 % | 370 - | 0 C deg |
| 1754062953 | 996.2 hPa | 33 C deg | 29 % | 372 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)