This is the latest recevied telemetry packets stored in our database for station/object DL8FAB-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782493377 | 31.7 deg C | 53.1 % | 0 | 0 | 0 |
| 1782492478 | 31.7 deg C | 54.9 % | 0 | 0 | 0 |
| 1782492144 | 31.7 deg C | 54.9 % | 0 | 0 | 0 |
| 1782491244 | 31.6 deg C | 55 % | 0 | 0 | 0 |
| 1782490344 | 31.6 deg C | 55 % | 0 | 0 | 0 |
| 1782489444 | 31.5 deg C | 55.2 % | 0 | 0 | 0 |
| 1782488544 | 31.5 deg C | 55.6 % | 0 | 0 | 0 |
| 1782487643 | 31.4 deg C | 56.1 % | 0 | 0 | 0 |
| 1782486743 | 31.3 deg C | 56.7 % | 0 | 0 | 0 |
| 1782485843 | 31.2 deg C | 56.9 % | 0 | 0 | 0 |
| 1782484943 | 31 deg C | 57.2 % | 0 | 0 | 0 |
| 1782484043 | 30.8 deg C | 57.6 % | 0 | 0 | 0 |
| 1782483143 | 30.6 deg C | 56.7 % | 0 | 0 | 0 |
| 1782482243 | 30.5 deg C | 56.4 % | 0 | 0 | 0 |
| 1782481343 | 30.3 deg C | 56.3 % | 0 | 0 | 0 |
| 1782480443 | 30.2 deg C | 56.2 % | 0 | 0 | 0 |
| 1782479683 | 30.1 deg C | 56.1 % | 0 | 0 | 0 |
| 1782478312 | 30 deg C | 55.7 % | 0 | 0 | 0 |
| 1782477411 | 30 deg C | 55.8 % | 0 | 0 | 0 |
| 1782476511 | 29.9 deg C | 55.8 % | 0 | 0 | 0 |
| 1782475611 | 29.9 deg C | 55.9 % | 0 | 0 | 0 |
| 1782474711 | 29.9 deg C | 55.9 % | 0 | 0 | 0 |
| 1782473811 | 29.8 deg C | 56 % | 0 | 0 | 0 |
| 1782472911 | 29.8 deg C | 56.2 % | 0 | 0 | 0 |
| 1782472011 | 29.8 deg C | 56.4 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)