This is the latest recevied telemetry packets stored in our database for station/object KC9EFZ-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779759069 | 3.3 VDC | 0 | 0 | 0 | 0 |
| 1779757868 | 3.31 VDC | 0 | 0 | 0 | 0 |
| 1779756667 | 3.33 VDC | 0 | 0 | 0 | 0 |
| 1779755467 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1779754265 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1779753064 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1779751864 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1779750663 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1779749463 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1779748263 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1779747062 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1779745861 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1779744660 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1779743460 | 3.44 VDC | 0 | 0 | 0 | 0 |
| 1779742259 | 3.44 VDC | 0 | 0 | 0 | 0 |
| 1779741059 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1779739859 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1779738658 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1779737458 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1779736258 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1779735057 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1779733857 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1779732656 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1779731456 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1779730256 | 3.48 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)