APRS Track Direct

My position About ☰

reset

BX6AEJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AEJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1766085732	64 cnt	0 cnt	48 cnt	8 cnt	8 cnt
1766085132	51 cnt	0 cnt	44 cnt	3 cnt	4 cnt
1766084532	59 cnt	0 cnt	47 cnt	4 cnt	8 cnt
1766083932	64 cnt	0 cnt	52 cnt	5 cnt	7 cnt
1766083332	55 cnt	0 cnt	47 cnt	5 cnt	3 cnt
1766082732	59 cnt	0 cnt	49 cnt	2 cnt	8 cnt
1766082132	53 cnt	0 cnt	48 cnt	2 cnt	3 cnt
1766081532	63 cnt	0 cnt	51 cnt	5 cnt	7 cnt
1766080932	56 cnt	0 cnt	51 cnt	0 cnt	5 cnt
1766080331	53 cnt	0 cnt	47 cnt	1 cnt	5 cnt
1766079732	50 cnt	0 cnt	46 cnt	2 cnt	2 cnt
1766079132	62 cnt	0 cnt	56 cnt	2 cnt	4 cnt
1766078532	56 cnt	0 cnt	49 cnt	2 cnt	5 cnt
1766077932	52 cnt	0 cnt	43 cnt	6 cnt	3 cnt
1766077332	55 cnt	0 cnt	38 cnt	7 cnt	10 cnt
1766076732	54 cnt	0 cnt	43 cnt	7 cnt	4 cnt
1766076131	61 cnt	0 cnt	51 cnt	6 cnt	4 cnt
1766075531	61 cnt	0 cnt	48 cnt	3 cnt	10 cnt
1766074931	52 cnt	0 cnt	39 cnt	3 cnt	10 cnt
1766074331	49 cnt	0 cnt	39 cnt	4 cnt	6 cnt
1766073732	50 cnt	1 cnt	45 cnt	2 cnt	3 cnt
1766073132	63 cnt	0 cnt	52 cnt	7 cnt	4 cnt
1766072531	58 cnt	0 cnt	43 cnt	7 cnt	8 cnt
1766071931	52 cnt	0 cnt	45 cnt	2 cnt	5 cnt
1766071331	42 cnt	0 cnt	32 cnt	4 cnt	6 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)