This is the latest recevied telemetry packets stored in our database for station/object OK1CNN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790640331 | 404 | 612 | 0 | 0 | 0 |
| 1790638538 | 403 | 612 | 0 | 0 | 0 |
| 1790633158 | 403 | 613 | 0 | 0 | 0 |
| 1790631365 | 404 | 613 | 0 | 0 | 0 |
| 1790629572 | 404 | 613 | 0 | 0 | 0 |
| 1790624191 | 403 | 613 | 0 | 0 | 0 |
| 1790622398 | 404 | 613 | 0 | 0 | 0 |
| 1790620604 | 404 | 614 | 0 | 0 | 0 |
| 1790618811 | 404 | 614 | 0 | 0 | 0 |
| 1790617017 | 404 | 614 | 0 | 0 | 0 |
| 1790615224 | 403 | 614 | 0 | 0 | 0 |
| 1790611637 | 404 | 614 | 0 | 0 | 0 |
| 1790609844 | 404 | 614 | 0 | 0 | 0 |
| 1790608050 | 404 | 614 | 0 | 0 | 0 |
| 1790602671 | 404 | 613 | 0 | 0 | 0 |
| 1790600878 | 404 | 613 | 0 | 0 | 0 |
| 1790595499 | 404 | 612 | 0 | 0 | 0 |
| 1790591913 | 404 | 611 | 0 | 0 | 0 |
| 1790590120 | 404 | 611 | 0 | 0 | 0 |
| 1790588327 | 404 | 610 | 0 | 0 | 0 |
| 1790586534 | 404 | 610 | 0 | 0 | 0 |
| 1790584742 | 404 | 609 | 0 | 0 | 0 |
| 1790582948 | 404 | 610 | 0 | 0 | 0 |
| 1790579362 | 404 | 609 | 0 | 0 | 0 |
| 1790577570 | 404 | 610 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)