This is the latest recevied telemetry packets stored in our database for station/object YO3TCO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753794715 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1753792821 | 4.38 VDC | 0 | 0 | 0 | 0 |
| 1753791021 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1753789224 | 4.84 VDC | 0 | 0 | 0 | 0 |
| 1753787421 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1753785621 | 4.34 VDC | 0 | 0 | 0 | 0 |
| 1753783821 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1753782020 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1753781826 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1753781743 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1753781698 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1753781633 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1753780596 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1753778793 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1753776993 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1753775193 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1753773393 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1753771593 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1753769792 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1753767992 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1753766192 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1753764402 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1753762434 | 4.77 VDC | 0 | 0 | 0 | 0 |
| 1753760809 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1753758775 | 4.8 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)