APRS Track Direct

My position About ☰

reset

SR3NPB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR3NPB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786721565	13.05 Volt	390 Pkt	130 Pkt	78 Pcnt
1786721265	13.05 Volt	360 Pkt	120 Pkt	78 Pcnt
1786720965	13.05 Volt	350 Pkt	110 Pkt	79 Pcnt
1786720665	13.05 Volt	340 Pkt	110 Pkt	78 Pcnt
1786720365	13.05 Volt	340 Pkt	110 Pkt	78 Pcnt
1786720065	13.05 Volt	320 Pkt	110 Pkt	77 Pcnt
1786719765	13.05 Volt	320 Pkt	110 Pkt	77 Pcnt
1786719465	13.05 Volt	320 Pkt	110 Pkt	77 Pcnt
1786719165	13.05 Volt	310 Pkt	120 Pkt	77 Pcnt
1786718865	13.05 Volt	310 Pkt	120 Pkt	77 Pcnt
1786718565	13.05 Volt	300 Pkt	110 Pkt	77 Pcnt
1786718265	13.05 Volt	310 Pkt	110 Pkt	78 Pcnt
1786717965	13.05 Volt	310 Pkt	120 Pkt	79 Pcnt
1786717665	13.05 Volt	340 Pkt	120 Pkt	79 Pcnt
1786717365	13.05 Volt	370 Pkt	130 Pkt	78 Pcnt
1786717065	13.05 Volt	380 Pkt	130 Pkt	80 Pcnt
1786716765	13.05 Volt	400 Pkt	140 Pkt	81 Pcnt
1786716465	13.05 Volt	430 Pkt	150 Pkt	80 Pcnt
1786716165	13.05 Volt	440 Pkt	150 Pkt	80 Pcnt
1786715865	13.05 Volt	460 Pkt	150 Pkt	80 Pcnt
1786715565	13.05 Volt	470 Pkt	160 Pkt	80 Pcnt
1786715265	13.05 Volt	480 Pkt	160 Pkt	81 Pcnt
1786714965	13.05 Volt	480 Pkt	160 Pkt	81 Pcnt
1786714665	13.05 Volt	480 Pkt	160 Pkt	80 Pcnt
1786714365	13.05 Volt	490 Pkt	170 Pkt	81 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)