This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770142388 | 517 Count | 955 Count | 289 Count | 0 VDC | 0 VDC |
| 1770138782 | 515 Count | 949 Count | 289 Count | 0 VDC | 0 VDC |
| 1770136978 | 514 Count | 945 Count | 289 Count | 0 VDC | 0 VDC |
| 1770133372 | 512 Count | 939 Count | 289 Count | 0 VDC | 0 VDC |
| 1770131581 | 511 Count | 935 Count | 289 Count | 0 VDC | 0 VDC |
| 1770129765 | 510 Count | 932 Count | 289 Count | 0 VDC | 0 VDC |
| 1770127961 | 509 Count | 929 Count | 289 Count | 0 VDC | 0 VDC |
| 1770124355 | 507 Count | 923 Count | 289 Count | 0 VDC | 0 VDC |
| 1770122551 | 506 Count | 920 Count | 289 Count | 0 VDC | 0 VDC |
| 1770120786 | 501 Count | 917 Count | 289 Count | 0 VDC | 0 VDC |
| 1770118983 | 500 Count | 913 Count | 289 Count | 0 VDC | 0 VDC |
| 1770117179 | 499 Count | 908 Count | 289 Count | 0 VDC | 0 VDC |
| 1770115376 | 498 Count | 904 Count | 289 Count | 0 VDC | 0 VDC |
| 1770113572 | 497 Count | 900 Count | 289 Count | 0 VDC | 0 VDC |
| 1770111769 | 494 Count | 897 Count | 287 Count | 0 VDC | 0 VDC |
| 1770109966 | 490 Count | 890 Count | 284 Count | 0 VDC | 0 VDC |
| 1770104555 | 478 Count | 870 Count | 275 Count | 0 VDC | 0 VDC |
| 1770057041 | 464 Count | 850 Count | 268 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)