This is the latest recevied telemetry packets stored in our database for station/object WB2QGZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | DigiRpt* | Temp* | InetiGate* |
|---|---|---|---|---|---|
| 1836274053 | 188 Pkts | 188 Pkts | 50 Pkts | 24 C | 0 Pkts |
| 1766234163 | 214 Pkts | 206 Pkts | 70 Pkts | 14 C | 0 Pkts |
| 1766230563 | 146 Pkts | 142 Pkts | 40 Pkts | 14 C | 0 Pkts |
| 1766226963 | 186 Pkts | 175 Pkts | 52 Pkts | 14 C | 0 Pkts |
| 1766223363 | 191 Pkts | 181 Pkts | 50 Pkts | 14 C | 1 Pkts |
| 1766219763 | 173 Pkts | 169 Pkts | 47 Pkts | 14 C | 1 Pkts |
| 1766216162 | 182 Pkts | 173 Pkts | 44 Pkts | 14 C | 0 Pkts |
| 1766212562 | 161 Pkts | 156 Pkts | 37 Pkts | 14 C | 0 Pkts |
| 1766208963 | 161 Pkts | 158 Pkts | 24 Pkts | 15 C | 0 Pkts |
| 1766205363 | 127 Pkts | 125 Pkts | 32 Pkts | 15 C | 0 Pkts |
| 1766201763 | 126 Pkts | 122 Pkts | 31 Pkts | 15 C | 0 Pkts |
| 1766198163 | 122 Pkts | 119 Pkts | 34 Pkts | 15 C | 0 Pkts |
| 1766194563 | 102 Pkts | 96 Pkts | 36 Pkts | 16 C | 2 Pkts |
| 1766190963 | 105 Pkts | 100 Pkts | 29 Pkts | 16 C | 0 Pkts |
| 1766187363 | 117 Pkts | 115 Pkts | 36 Pkts | 16 C | 0 Pkts |
| 1766183764 | 130 Pkts | 126 Pkts | 39 Pkts | 16 C | 0 Pkts |
| 1766180162 | 163 Pkts | 155 Pkts | 63 Pkts | 16 C | 0 Pkts |
| 1766176563 | 168 Pkts | 166 Pkts | 38 Pkts | 16 C | 1 Pkts |
| 1766172963 | 217 Pkts | 212 Pkts | 59 Pkts | 17 C | 4 Pkts |
| 1766169362 | 207 Pkts | 198 Pkts | 51 Pkts | 17 C | 0 Pkts |
| 1766165762 | 241 Pkts | 231 Pkts | 71 Pkts | 17 C | 1 Pkts |
| 1766162162 | 231 Pkts | 219 Pkts | 49 Pkts | 17 C | 6 Pkts |
| 1766158562 | 275 Pkts | 269 Pkts | 88 Pkts | 17 C | 6 Pkts |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)