APRS Track Direct

My position About ☰

reset

XE2J-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1770134992	14.03 Volt	210 Pkt	130 Pkt	81 Pcnt	16 C
1770134092	12.38 Volt	190 Pkt	120 Pkt	93 Pcnt	16 C
1770133192	14.03 Volt	170 Pkt	110 Pkt	93 Pcnt	15.5 C
1770132292	14.03 Volt	160 Pkt	100 Pkt	95 Pcnt	15.5 C
1770131392	14.03 Volt	150 Pkt	90 Pkt	95 Pcnt	15.5 C
1770130492	14.03 Volt	130 Pkt	80 Pkt	95 Pcnt	15.5 C
1770129592	14.03 Volt	120 Pkt	70 Pkt	95 Pcnt	15.5 C
1770128692	14.03 Volt	100 Pkt	60 Pkt	96 Pcnt	15.5 C
1770127792	14.1 Volt	90 Pkt	60 Pkt	96 Pcnt	15 C
1770126892	14.03 Volt	90 Pkt	50 Pkt	94 Pcnt	15 C
1770125992	14.03 Volt	90 Pkt	50 Pkt	96 Pcnt	15 C
1770125092	14.03 Volt	80 Pkt	50 Pkt	95 Pcnt	15 C
1770124192	14.03 Volt	80 Pkt	50 Pkt	97 Pcnt	15 C
1770123292	14.03 Volt	80 Pkt	50 Pkt	95 Pcnt	15 C
1770122392	14.03 Volt	80 Pkt	50 Pkt	95 Pcnt	15 C
1770121492	14.03 Volt	80 Pkt	50 Pkt	96 Pcnt	15 C
1770120592	14.03 Volt	80 Pkt	50 Pkt	98 Pcnt	15 C
1770119692	11.93 Volt	90 Pkt	50 Pkt	98 Pcnt	15 C
1770118792	14.03 Volt	90 Pkt	50 Pkt	97 Pcnt	15 C
1770117892	14.03 Volt	80 Pkt	50 Pkt	96 Pcnt	15 C
1770116992	14.03 Volt	90 Pkt	50 Pkt	96 Pcnt	15.5 C
1770116092	14.03 Volt	90 Pkt	50 Pkt	96 Pcnt	15.5 C
1770115192	14.03 Volt	90 Pkt	50 Pkt	97 Pcnt	15.5 C
1770114292	14.03 Volt	90 Pkt	50 Pkt	98 Pcnt	15.5 C
1770113392	14.03 Volt	90 Pkt	50 Pkt	100 Pcnt	15.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)