This is the latest recevied telemetry packets stored in our database for station/object A68AN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CabinetTemp* | CabinetHum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732285953 | 33.5 C | 47 %RH | 0 | 0 | 0 |
| 1732284108 | 34.2 C | 45 %RH | 0 | 0 | 0 |
| 1732284089 | 34.2 C | 45 %RH | 0 | 0 | 0 |
| 1732282229 | 34.9 C | 43 %RH | 0 | 0 | 0 |
| 1732281048 | 35.6 C | 41 %RH | 0 | 0 | 0 |
| 1732280369 | 36 C | 40 %RH | 0 | 0 | 0 |
| 1732278510 | 37.2 C | 37 %RH | 0 | 0 | 0 |
| 1732277988 | 37.5 C | 36 %RH | 0 | 0 | 0 |
| 1732276649 | 38.7 C | 34 %RH | 0 | 0 | 0 |
| 1732274927 | 40.5 C | 31 %RH | 0 | 0 | 0 |
| 1732274788 | 40.7 C | 31 %RH | 0 | 0 | 0 |
| 1732272930 | 42.7 C | 29 %RH | 0 | 0 | 0 |
| 1732271868 | 43.9 C | 26 %RH | 0 | 0 | 0 |
| 1732271069 | 45 C | 25 %RH | 0 | 0 | 0 |
| 1732269209 | 46.8 C | 22 %RH | 0 | 0 | 0 |
| 1732268808 | 47.1 C | 22 %RH | 0 | 0 | 0 |
| 1732267350 | 47.5 C | 21 %RH | 0 | 0 | 0 |
| 1732265748 | 47.5 C | 21 %RH | 0 | 0 | 0 |
| 1732265489 | 47.6 C | 21 %RH | 0 | 0 | 0 |
| 1732263629 | 47.5 C | 21 %RH | 0 | 0 | 0 |
| 1732262688 | 47.1 C | 22 %RH | 0 | 0 | 0 |
| 1732261769 | 46.5 C | 23 %RH | 0 | 0 | 0 |
| 1732259909 | 44.6 C | 26 %RH | 0 | 0 | 0 |
| 1732259627 | 44.2 C | 27 %RH | 0 | 0 | 0 |
| 1732258050 | 42.1 C | 31 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
CabinetTemp: 0, 0.1, 0
CabinetHum: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)