APRS Track Direct

My position About ☰

reset

N9UMJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N9UMJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1770141092	13.88 Volt	870 Pkt	290 Pkt	70 Pcnt	62.6 F
1770141091	13.88 Volt	870 Pkt	290 Pkt	70 Pcnt	62.6 F
1770139292	13.88 Volt	860 Pkt	290 Pkt	70 Pcnt	61.7 F
1770139292	13.88 Volt	860 Pkt	290 Pkt	70 Pcnt	61.7 F
1770137493	13.88 Volt	880 Pkt	300 Pkt	70 Pcnt	61.7 F
1770137492	13.88 Volt	880 Pkt	300 Pkt	70 Pcnt	61.7 F
1770135692	14.03 Volt	940 Pkt	330 Pkt	71 Pcnt	61.7 F
1770135692	14.03 Volt	940 Pkt	330 Pkt	71 Pcnt	61.7 F
1770133892	14.4 Volt	1010 Pkt	350 Pkt	72 Pcnt	61.7 F
1770133892	14.4 Volt	1010 Pkt	350 Pkt	72 Pcnt	61.7 F
1770132092	14.33 Volt	990 Pkt	340 Pkt	68 Pcnt	61.7 F
1770132092	14.33 Volt	990 Pkt	340 Pkt	68 Pcnt	61.7 F
1770130293	14.33 Volt	940 Pkt	340 Pkt	67 Pcnt	61.7 F
1770130292	14.33 Volt	940 Pkt	340 Pkt	67 Pcnt	61.7 F
1770128493	14.33 Volt	970 Pkt	360 Pkt	67 Pcnt	61.7 F
1770128492	14.33 Volt	970 Pkt	360 Pkt	67 Pcnt	61.7 F
1770126693	14.4 Volt	980 Pkt	380 Pkt	68 Pcnt	61.7 F
1770126692	14.4 Volt	980 Pkt	380 Pkt	68 Pcnt	61.7 F
1770124893	14.33 Volt	1060 Pkt	380 Pkt	70 Pcnt	61.7 F
1770124892	14.33 Volt	1060 Pkt	380 Pkt	70 Pcnt	61.7 F
1770123093	14.33 Volt	1050 Pkt	360 Pkt	69 Pcnt	61.7 F
1770123092	14.33 Volt	1050 Pkt	360 Pkt	69 Pcnt	61.7 F
1770121293	13.43 Volt	1020 Pkt	360 Pkt	69 Pcnt	61.7 F
1770121293	13.43 Volt	1020 Pkt	360 Pkt	69 Pcnt	61.7 F
1770119493	14.33 Volt	980 Pkt	340 Pkt	69 Pcnt	61.7 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)