APRS Track Direct

My position About ☰

reset

DB3MI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB3MI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765965414	0.1 Rx Erlang	0 Tx Erlang	70 count/10m	45 count/10m	0 count/10m
1765964215	0.12 Rx Erlang	0 Tx Erlang	86 count/10m	54 count/10m	0 count/10m
1765963015	0.14 Rx Erlang	0 Tx Erlang	93 count/10m	64 count/10m	0 count/10m
1765961814	0.12 Rx Erlang	0 Tx Erlang	85 count/10m	56 count/10m	0 count/10m
1765960615	0.13 Rx Erlang	0 Tx Erlang	86 count/10m	51 count/10m	0 count/10m
1765959414	0.12 Rx Erlang	0 Tx Erlang	84 count/10m	56 count/10m	0 count/10m
1765958214	0.13 Rx Erlang	0 Tx Erlang	90 count/10m	64 count/10m	0 count/10m
1765957015	0.12 Rx Erlang	0 Tx Erlang	83 count/10m	56 count/10m	0 count/10m
1765955815	0.13 Rx Erlang	0 Tx Erlang	86 count/10m	59 count/10m	0 count/10m
1765954615	0.11 Rx Erlang	0 Tx Erlang	77 count/10m	54 count/10m	0 count/10m
1765953415	0.12 Rx Erlang	0 Tx Erlang	89 count/10m	58 count/10m	0 count/10m
1765952215	0.14 Rx Erlang	0 Tx Erlang	96 count/10m	67 count/10m	0 count/10m
1765951015	0.11 Rx Erlang	0 Tx Erlang	80 count/10m	51 count/10m	0 count/10m
1765949815	0.15 Rx Erlang	0 Tx Erlang	95 count/10m	61 count/10m	0 count/10m
1765948615	0.14 Rx Erlang	0 Tx Erlang	92 count/10m	61 count/10m	0 count/10m
1765947415	0.12 Rx Erlang	0 Tx Erlang	86 count/10m	53 count/10m	0 count/10m
1765946214	0.14 Rx Erlang	0 Tx Erlang	106 count/10m	60 count/10m	0 count/10m
1765945014	0.16 Rx Erlang	0 Tx Erlang	103 count/10m	67 count/10m	0 count/10m
1765943815	0.16 Rx Erlang	0 Tx Erlang	106 count/10m	65 count/10m	0 count/10m
1765942614	0.16 Rx Erlang	0 Tx Erlang	106 count/10m	69 count/10m	0 count/10m
1765941415	0.17 Rx Erlang	0 Tx Erlang	113 count/10m	74 count/10m	0 count/10m
1765940215	0.15 Rx Erlang	0 Tx Erlang	105 count/10m	56 count/10m	0 count/10m
1765939014	0.16 Rx Erlang	0 Tx Erlang	111 count/10m	60 count/10m	0 count/10m
1765937815	0.08 Rx Erlang	0 Tx Erlang	38 count/10m	17 count/10m	0 count/10m
1765936615	0.07 Rx Erlang	0 Tx Erlang	38 count/10m	15 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)