APRS Track Direct

My position About ☰

reset

UCAPK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UCAPK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	DgS1h*	Eff1h*
1836274605	13.95 Volt	10 Pkt	0 Pcnt	30 Pcnt
1836274455	13.95 Volt	10 Pkt	0 Pcnt	30 Pcnt
1836274306	13.95 Volt	10 Pkt	0 Pcnt	35 Pcnt
1836274156	14.03 Volt	10 Pkt	0 Pcnt	30 Pcnt
1836274005	14.03 Volt	10 Pkt	0 Pcnt	36 Pcnt
1778069023	13.95 Volt	20 Pkt	4 Pcnt	40 Pcnt
1778068723	13.95 Volt	10 Pkt	4.08 Pcnt	38 Pcnt
1778068423	13.95 Volt	10 Pkt	4.08 Pcnt	38 Pcnt
1778068123	13.95 Volt	10 Pkt	2.08 Pcnt	35 Pcnt
1778067823	13.88 Volt	20 Pkt	4.26 Pcnt	42 Pcnt
1778067523	13.95 Volt	10 Pkt	4.65 Pcnt	30 Pcnt
1778067223	13.95 Volt	20 Pkt	4.17 Pcnt	41 Pcnt
1778066923	13.95 Volt	10 Pkt	4.65 Pcnt	44 Pcnt
1778066623	13.95 Volt	10 Pkt	4.76 Pcnt	45 Pcnt
1778066323	13.95 Volt	10 Pkt	2.5 Pcnt	42 Pcnt
1778066023	13.95 Volt	20 Pkt	4.55 Pcnt	45 Pcnt
1778065723	13.95 Volt	10 Pkt	4.88 Pcnt	41 Pcnt
1778065423	13.95 Volt	20 Pkt	4.76 Pcnt	47 Pcnt
1778065123	13.95 Volt	10 Pkt	4.65 Pcnt	44 Pcnt
1778064823	13.95 Volt	10 Pkt	4.76 Pcnt	45 Pcnt
1778064523	13.95 Volt	10 Pkt	4.26 Pcnt	40 Pcnt
1778064223	13.95 Volt	10 Pkt	2.04 Pcnt	36 Pcnt
1778063923	13.95 Volt	10 Pkt	4.55 Pcnt	29 Pcnt
1778063623	13.95 Volt	20 Pkt	3.92 Pcnt	39 Pcnt
1778063323	13.95 Volt	10 Pkt	4 Pcnt	38 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

DgS1h: 0, 0.001, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)