APRS Track Direct

My position About ☰

reset

NI4CE-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NI4CE-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Dg1h*	Eff1h*
1732226080	14.03 Volt	24 C	900 Pkt	320 Pkt	68 Pcnt
1732226080	14.03 Volt	24 C	900 Pkt	320 Pkt	68 Pcnt
1732225780	14.03 Volt	24.5 C	920 Pkt	320 Pkt	68 Pcnt
1732225480	14.03 Volt	24.5 C	920 Pkt	320 Pkt	69 Pcnt
1732225480	14.03 Volt	24.5 C	920 Pkt	320 Pkt	69 Pcnt
1732225180	14.03 Volt	24.5 C	920 Pkt	320 Pkt	68 Pcnt
1732224880	14.03 Volt	24.5 C	930 Pkt	330 Pkt	69 Pcnt
1732224880	14.03 Volt	24.5 C	930 Pkt	330 Pkt	69 Pcnt
1732224580	14.03 Volt	24 C	930 Pkt	320 Pkt	68 Pcnt
1732224280	14.03 Volt	24.5 C	930 Pkt	320 Pkt	69 Pcnt
1732224280	14.03 Volt	24.5 C	930 Pkt	320 Pkt	69 Pcnt
1732223980	13.95 Volt	24.5 C	920 Pkt	320 Pkt	69 Pcnt
1732223680	14.03 Volt	24 C	930 Pkt	330 Pkt	70 Pcnt
1732223680	14.03 Volt	24 C	930 Pkt	330 Pkt	70 Pcnt
1732223380	14.03 Volt	24.5 C	940 Pkt	330 Pkt	70 Pcnt
1732223080	14.03 Volt	24 C	940 Pkt	330 Pkt	69 Pcnt
1732223080	14.03 Volt	24 C	940 Pkt	330 Pkt	69 Pcnt
1732222780	14.03 Volt	24.5 C	950 Pkt	340 Pkt	69 Pcnt
1732222481	14.03 Volt	24.5 C	940 Pkt	330 Pkt	70 Pcnt
1732222480	14.03 Volt	24.5 C	940 Pkt	330 Pkt	70 Pcnt
1732222180	13.88 Volt	24 C	930 Pkt	330 Pkt	70 Pcnt
1732221881	14.03 Volt	24.5 C	930 Pkt	340 Pkt	69 Pcnt
1732221880	14.03 Volt	24.5 C	930 Pkt	340 Pkt	69 Pcnt
1732221580	13.88 Volt	24 C	950 Pkt	340 Pkt	69 Pcnt
1732221280	14.03 Volt	24.5 C	940 Pkt	340 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)