APRS Track Direct

My position About ☰

reset

DB0PIB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0PIB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vfm*	Vbuf*	Isol*	Ievs*	Tbat*
1786722975	13.3 V	13.3 V	0.59 A	1.95 A	26.5 C
1786722675	13.3 V	13.4 V	0.59 A	1.95 A	26.5 C
1786722375	13.3 V	13.4 V	0.59 A	1.95 A	26.5 C
1786722075	13.3 V	13.4 V	0.78 A	1.95 A	26.5 C
1786721775	13.3 V	13.4 V	0.78 A	1.76 A	26.5 C
1786721475	13.4 V	13.4 V	0.98 A	1.56 A	26.5 C
1786721175	13.4 V	13.4 V	1.17 A	1.37 A	26.5 C
1786720875	13.4 V	13.4 V	1.37 A	1.37 A	26.5 C
1786720575	13.4 V	13.4 V	1.17 A	1.37 A	26.5 C
1786720275	13.4 V	13.4 V	1.37 A	1.37 A	26.5 C
1786719975	13.4 V	13.4 V	1.17 A	1.37 A	26.5 C
1786719675	13.4 V	13.4 V	1.37 A	1.17 A	26.5 C
1786719375	13.2 V	13.3 V	0.2 A	2.54 A	26.5 C
1786719075	13.4 V	13.5 V	1.76 A	0.78 A	26.5 C
1786718775	13.4 V	13.4 V	1.17 A	1.56 A	26.5 C
1786718475	13.3 V	13.4 V	0.78 A	1.95 A	26.5 C
1786718175	13.4 V	13.4 V	1.37 A	1.37 A	26.5 C
1786717875	13.3 V	13.3 V	0.2 A	2.34 A	26.5 C
1786717575	13.3 V	13.3 V	0.39 A	1.95 A	26.5 C
1786717275	13.3 V	13.3 V	0.2 A	2.34 A	26.5 C
1786716975	13.4 V	13.4 V	1.76 A	0.98 A	26.5 C
1786716675	13.5 V	13.5 V	2.34 A	0.59 A	26.5 C
1786716375	13.4 V	13.4 V	1.56 A	1.37 A	26.5 C
1786716075	13.4 V	13.4 V	1.37 A	1.56 A	26.5 C
1786715775	13.3 V	13.4 V	1.37 A	1.56 A	26.5 C

*Used Equation Coefficients:

Vfm: 0, 0.1, 0

Vbuf: 0, 0.1, 0

Isol: 0, 0.1953, -24.8031

Ievs: 0, 0.1953, -24.8031

Tbat: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)