APRS Track Direct

My position About ☰

reset

K2ZRO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2ZRO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1744827466	0.05 Rx Erlang	0.01 Tx Erlang	39 count/10m	10 count/10m	6 count/10m
1744826266	0.03 Rx Erlang	0.01 Tx Erlang	32 count/10m	2 count/10m	8 count/10m
1744825067	0.04 Rx Erlang	0.01 Tx Erlang	38 count/10m	12 count/10m	5 count/10m
1744823866	0.02 Rx Erlang	0 Tx Erlang	19 count/10m	5 count/10m	2 count/10m
1744822666	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	6 count/10m	5 count/10m
1744821466	0.04 Rx Erlang	0.01 Tx Erlang	33 count/10m	10 count/10m	9 count/10m
1744820266	0.05 Rx Erlang	0.01 Tx Erlang	35 count/10m	13 count/10m	5 count/10m
1744819066	0.04 Rx Erlang	0.01 Tx Erlang	31 count/10m	4 count/10m	6 count/10m
1744817866	0.04 Rx Erlang	0.01 Tx Erlang	31 count/10m	4 count/10m	10 count/10m
1744816666	0.04 Rx Erlang	0.01 Tx Erlang	30 count/10m	4 count/10m	5 count/10m
1744815467	0.04 Rx Erlang	0.01 Tx Erlang	29 count/10m	3 count/10m	5 count/10m
1744814266	0.04 Rx Erlang	0.01 Tx Erlang	31 count/10m	2 count/10m	7 count/10m
1744813066	0.03 Rx Erlang	0 Tx Erlang	26 count/10m	5 count/10m	3 count/10m
1744811866	0.05 Rx Erlang	0.01 Tx Erlang	37 count/10m	5 count/10m	7 count/10m
1744810666	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	4 count/10m	8 count/10m
1744809466	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	4 count/10m	4 count/10m
1744808266	0.04 Rx Erlang	0.01 Tx Erlang	30 count/10m	2 count/10m	5 count/10m
1744807066	0.06 Rx Erlang	0.02 Tx Erlang	39 count/10m	3 count/10m	10 count/10m
1744805866	0.06 Rx Erlang	0.01 Tx Erlang	62 count/10m	4 count/10m	8 count/10m
1744804666	0.07 Rx Erlang	0.01 Tx Erlang	55 count/10m	6 count/10m	9 count/10m
1744803466	0.07 Rx Erlang	0.02 Tx Erlang	65 count/10m	7 count/10m	12 count/10m
1744802267	0.06 Rx Erlang	0.02 Tx Erlang	63 count/10m	3 count/10m	15 count/10m
1744801066	0.07 Rx Erlang	0.01 Tx Erlang	56 count/10m	4 count/10m	11 count/10m
1744799867	0.07 Rx Erlang	0.01 Tx Erlang	62 count/10m	6 count/10m	10 count/10m
1744798666	0.06 Rx Erlang	0.01 Tx Erlang	44 count/10m	5 count/10m	7 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)