This is the latest recevied telemetry packets stored in our database for station/object W4KEL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719664664 | 13.27 | 31.01 | 0 | 0 | 0 |
1719662620 | 13.3 | 31.01 | 0 | 0 | 0 |
1719660577 | 13.24 | 31.01 | 0 | 0 | 0 |
1719658533 | 13.27 | 31.01 | 0 | 0 | 0 |
1719656490 | 13.21 | 31.01 | 0 | 0 | 0 |
1719654446 | 13.24 | 31.5 | 0 | 0 | 0 |
1719652402 | 13.21 | 31.5 | 0 | 0 | 0 |
1719650358 | 13.3 | 31.5 | 0 | 0 | 0 |
1719648314 | 13.24 | 31.5 | 0 | 0 | 0 |
1719646271 | 13.21 | 31.99 | 0 | 0 | 0 |
1719644226 | 13.24 | 31.99 | 0 | 0 | 0 |
1719642183 | 13.19 | 32.48 | 0 | 0 | 0 |
1719640139 | 12.6 | 32.96 | 0 | 0 | 0 |
1719638095 | 13.1 | 33.45 | 0 | 0 | 0 |
1719636050 | 13.24 | 33.45 | 0 | 0 | 0 |
1719634006 | 13.21 | 33.94 | 0 | 0 | 0 |
1719631961 | 13.21 | 34.43 | 0 | 0 | 0 |
1719629916 | 13.39 | 35.9 | 0 | 0 | 0 |
1719627871 | 13.21 | 35.41 | 0 | 0 | 0 |
1719625826 | 13.19 | 35.9 | 0 | 0 | 0 |
1719623782 | 13.21 | 36.88 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)