This is the latest recevied telemetry packets stored in our database for station/object SA5BKE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765968867 | 5 | 753 C | 374 V | 3 M | 0 |
| 1765968587 | 6 | 753 C | 375 V | 5 M | 0 |
| 1765967747 | 6 | 753 C | 375 V | 3 M | 0 |
| 1765967187 | 5 | 754 C | 375 V | 6 M | 0 |
| 1765966907 | 5 | 754 C | 376 V | 4 M | 0 |
| 1765966627 | 5 | 755 C | 375 V | 4 M | 0 |
| 1765966347 | 4 | 755 C | 376 V | 3 M | 0 |
| 1765965507 | 4 | 756 C | 376 V | 4 M | 0 |
| 1765964947 | 5 | 756 C | 376 V | 5 M | 0 |
| 1765964667 | 5 | 755 C | 377 V | 5 M | 0 |
| 1765964106 | 5 | 755 C | 377 V | 6 M | 0 |
| 1765963826 | 6 | 755 C | 378 V | 5 M | 0 |
| 1765962426 | 5 | 757 C | 379 V | 4 M | 0 |
| 1765962146 | 5 | 758 C | 380 V | 4 M | 0 |
| 1765961866 | 5 | 760 C | 379 V | 4 M | 0 |
| 1765961586 | 7 | 763 C | 381 V | 4 M | 0 |
| 1765961306 | 6 | 770 C | 381 V | 5 M | 0 |
| 1765961026 | 7 | 786 C | 382 V | 4 M | 0 |
| 1765960746 | 7 | 815 C | 393 V | 4 M | 0 |
| 1765960466 | 8 | 814 C | 394 V | 5 M | 0 |
| 1765960186 | 8 | 813 C | 393 V | 5 M | 0 |
| 1765959626 | 7 | 813 C | 392 V | 4 M | 0 |
| 1765959346 | 6 | 813 C | 392 V | 5 M | 0 |
| 1765959066 | 8 | 813 C | 390 V | 3 M | 0 |
| 1765958786 | 6 | 812 C | 390 V | 4 M | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)