This is the latest recevied telemetry packets stored in our database for station/object F5OPV-zz. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Temp* | RH* | Patm* | Lux.* |
|---|---|---|---|---|---|
| 1782502192 | 6.25 volts | 30 C | 54 % | 1016 hPa | 9 % |
| 1782500989 | 6.25 volts | 31 C | 53 % | 1016 hPa | 15 % |
| 1782499786 | 6.25 volts | 31 C | 52 % | 1016 hPa | 21 % |
| 1782498584 | 6.25 volts | 31 C | 52 % | 1016 hPa | 25 % |
| 1782497382 | 6.25 volts | 31 C | 51 % | 1016 hPa | 27 % |
| 1782496179 | 6.25 volts | 32 C | 51 % | 1016 hPa | 31 % |
| 1782494977 | 6.25 volts | 32 C | 51 % | 1016 hPa | 32 % |
| 1782493775 | 6.25 volts | 32 C | 50 % | 1016 hPa | 33 % |
| 1782492573 | 6.25 volts | 32 C | 50 % | 1016 hPa | 35 % |
| 1782491372 | 6.26 volts | 32 C | 50 % | 1016 hPa | 35 % |
| 1782490168 | 6.26 volts | 32 C | 49 % | 1016 hPa | 36 % |
| 1782488965 | 6.28 volts | 32 C | 49 % | 1016 hPa | 37 % |
| 1782487763 | 6.28 volts | 32 C | 49 % | 1017 hPa | 38 % |
| 1782486561 | 6.28 volts | 32 C | 49 % | 1017 hPa | 38 % |
| 1782485358 | 6.28 volts | 32 C | 50 % | 1017 hPa | 39 % |
| 1782484155 | 6.28 volts | 32 C | 50 % | 1017 hPa | 39 % |
| 1782482953 | 6.28 volts | 32 C | 50 % | 1017 hPa | 40 % |
| 1782481750 | 6.28 volts | 32 C | 50 % | 1017 hPa | 41 % |
| 1782480549 | 6.28 volts | 31 C | 50 % | 1017 hPa | 42 % |
| 1782479346 | 6.29 volts | 31 C | 50 % | 1018 hPa | 43 % |
| 1782478144 | 6.29 volts | 31 C | 51 % | 1018 hPa | 44 % |
| 1782476943 | 6.29 volts | 31 C | 51 % | 1018 hPa | 46 % |
| 1782475740 | 6.29 volts | 31 C | 51 % | 1018 hPa | 49 % |
| 1782474537 | 6.29 volts | 31 C | 51 % | 1018 hPa | 51 % |
| 1782473335 | 6.31 volts | 31 C | 51 % | 1018 hPa | 55 % |
*Used Equation Coefficients:
Vbat: 0, 1, 0
Temp: 0, 1, 0
RH: 0, 1, 0
Patm: 0, 1, 0
Lux.: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)